Andersen System 3 E-Series Installation

System 3 Blinds Installation
Product Series: E-Series
Product Type: Casement and Awning Windows
Parts Included:
(2) Bottom Rail (1) Lift Cord
Support Clips Retainer Cleat
Window Blind Cord Can
STRANGLE Your Child
Children can climb furniture to
reach cords.
Move crib and furniture away.
Shorten cords to prevent reach.
Keep cords separate. Twisted or
knotted cords can create a loop.
Keep all cords out of children's reach.
Blinds must be lowered at least 6" from fully raised
position when opening window. Failure to do so may
result in damage to blinds.
"Andersen" and all other marks where denoted are trademarks of Andersen Corporation. ©2019 Andersen Corporation. All rights reserved.
(7) #6 x 3/4"
Pan Head Screws
6"
Minimum
Read these instructions before starting procedure.
For additional information visit www.andersenwindows.com.
For questions call 1-888-888-7020.
Tools and Supplies Needed:
Safety
Glasses
· Follow manufacturers' instructions for hand and power
tools. Always wear safety glasses. Failure to do so could
result in injury, product or property damage.
· Use caution when working at elevated heights and
around window and door openings. Follow the
manufacturers' instructions for ladders and scaffolding.
Failure to do so could result in injury or death.
· Windows, doors, and installation components can
have sharp edges. Wear protective equipment when
handling. Failure to do so could result in injury.
· Support blind panel at all times until fastened. Failure
to do so could result in blind panel falling out causing
injury, property or product damage.
1
Insert bottom rail support clips between bottom glass stop
and glass, 4" from each corner.
Phillips Drill / Driver
Screwdriver
4"
9 1846 60 BA- 0 0
04/28/2020