Table of Contents
Advertisement
Press Start
The dishwasher will now start. It
manages the entire wash automatically.
Ensure that the door is properly closed or
the machine will not start.
The display shows 'Program started'. If the
door is open or not properly closed, 'Close
door' appears in the display.
Changing program
If you wish to change the program after having
started the machine, press the Start/Stop but-
ton for three seconds. Then select a new
program and press the Start/Stop button
again.
Do you want to load more dishes?
Carefully open the door; the machine will
stop automatically, put in the dishes, close
the door and the dishwasher will continue
from where it left off.
If the machine is switched off at the main
switch
(or in the event of a power cut) before the
washing program has been completed, the
interrupted program will continue when the
power comes back on.
NB!
If the power is switched off, or if the door
is open for more than 2 minutes during
drying, the program is interrupted.
7
After dishwashing
When the program is finished, End ap-
pears next to the Start/Stop button. Should
you wish to disconnect the current com-
pletely, just switch off at the main switch.
Turn off the water tap if the machine is not to
be used for an extended period, e.g. during
holidays.
17
Advertisement
Table of Contents
