Samsung WF1114 Series Service Manual page 15

Part
Sub-pcb panel
Figure Description
1. Remove the 2 screws holding the front
operating panel.
2. Remove the screws at the top of the ASSY-
PANEL CONTROL.
3. Hold the ASSY-PANEL CONTROL while
pulling it upwards and release the hook to
remove it.
4. Disconnect the 3 terminals connected to the
PCB by hand.
5. Remove the four screws holding the PCB
and release the hooks on both sides to
remove the PCB for repair / replacement.
Disassembly and Reassembly _ 13