Ashly LX-308B Operating Manual page 6

Page - 6
Safety Instructions – 3
Introduction - 4
LX-308B Mixer – 5
The LX-308B is 1RU, and weighs 10 pounds.
Connectors & Cables – 5
Physical Description - 6
Front Panel
Rear Panel
Installation – 7
Typical Applications - 8
Troubleshooting - 9
Dimensions - 9
Specifications - 10
Warranty - 11
LX-308B Front Panel
1. Channel Level - This is the individual channel
volume control, which feeds a channel to the
main mix.
2. Channel Pan - This control adjusts the position
of the channel in the stereo mix.
3. Mic/Line Switch - This switch on the first two
inputs increases the channel input sensitivity by
30 dB to allow the use of low impedance
dynamic microphones.
4. On/Off (mute) Switch - This switch on each
channel will turn the channel completely off
allowing the channel level to remain at its
desired setting when the input is not needed.
5. Output Meters - A pair of peak detecting 6-
segment LED meters are used to indicate
output level. Green LED's are used below 0
VU, yellow above 0 VU, and red LED's indicate
clipping. This meter pair monitors the main
stereo output (0 VU = +4dBu). The red clipping
LED's also monitor the summing amplifiers,
making it possible for these indicators to
illuminate even with the stereo output level
turned off.
Copyright© 2007 – Ashly Audio Inc.
Operator Manual – LX-308B Mixer
6. Stereo Output Level - This is the main master
gain, which sets the operating level for the
entire mixer. This control does not effect the
mono output level.
7. Stereo Output Mute - This switch entirely
mutes the main stereo output. The headphone
and mono output are not affected. This is
particularly useful when the LX-308 is used as
a sub-mixer.
8. Mono Level - This is the master gain control
for the mono output, which is the combined
signal of the left and right outputs. It has no
effect on the stereo output.
9. Stereo Headphones Level - This adjusts the
volume level of the front panel headphone jack
10. Power Indicator LED – When illuminated,
indicates that the rear power switch is in the
ON position.