Advertisement
Quick Links
Table of Contents
Receiving instructions:
After delivery, remove the packaging from the product. Inspect the product closely to determine whether
it sustained damage during transport. If damage is discovered, record a complete description of it on the
bill of lading. If the product is undamaged, discard the packaging.
NOTE: The end-user is solely responsible for confirming that product design, use, and maintenance comply
with laws, regulations, codes, and mandatory standards applied where the product is used.
Replacement Parts and Technical Assistance:
For answers to questions not addressed in these instructions and to order replacement parts, labels,
and accessories, call our Technical Service and Parts Department at (260) 665-7586. The department can
also be contacted online at http://www.vestilmfg.com/parts_info.htm.
Model
Specifications.....................................................................................................................
Signal
Words...................................................................................................................................................
Hazards of Using the
Ladder..........................................................................................................
Exploded Views and Bills of Materials...........................................................................................4 - 13
LAD-PW-(18/26/32)-(2/3/4/5)-(P/G)...........................................................................................4, 5
LAD-PW-(18/26/32)-(6/7)-(P/G)...............................................................................................6,
LAD-PW-(18/26/32)-(8/9/10)-(P/G)...........................................................................................8,
LAD-PW-(26/32)-11-(P/G)...................................................................................................10,
LAD-PW-(26/32)-12-(P/G)...................................................................................................12,
Installing Front Casters: 2-5 Step
Installing Front Casters: 6-12 Step
Assembling the
Ladder............................................................................................16, 17, 18, 19,
Record of Satisfactory
National
Standards.....................................................................................................................
Using the
Ladder...................................................................................................................20,
Inspections &
Maintenance.............................................................................................................................
Diagram............................................................................................................................................
Warranty........................................................................................................................
Table of Contents
2999 North Wayne Street, P.O. Box 507, Angola, IN 46703
Telephone: (260) 665-7586 -or- Toll Free (800) 348-0868
LAD-PW Series Mobile Ladder Stands
Instruction Manual
Models.......................................................................................
Models......................................................................................
Condition...................................................................................................
Copyright 2019 Vestil Manufacturing Co.
Rev. 10.24.2019
Vestil Manufacturing Corp.
Fax: (260) 665-1339
Web:
www.vestilmfg.com
Table of Contents
LAD-PW, MANUAL
Email:
info@vestil.com
Page 1 of 23
2
3
3
7
9
11
13
14
15
20
20
20
21
21
22
23
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for Vestil LAD-PW-18-2-P
Summary of Contents for Vestil LAD-PW-18-2-P
-
Page 1: Table Of Contents
Installing Front Casters: 6-12 Step Models………………………………………………………………………….. Assembling the Ladder…..……………………………………………………………………………16, 17, 18, 19, Record of Satisfactory Condition……………………………………………………………………………………… National Standards……………………………………………………………………………………………………... Using the Ladder……..…………..…………………………………………………………………………………20, Inspections & Maintenance…………......................... Labeling Diagram………...…..........................Limited Warranty…………...…………………………………………………………………………………………… Table of Contents Copyright 2019 Vestil Manufacturing Co. Page 1 of 23... - Page 2 Click the “Specifications” tab. Scroll the page to the entry for the model ladder you purchased, and click the button in the “PDF” column that looks like a pencil inside a blue- bordered box. A PDF file will open. This file is the specifications document. Print a copy of the document and keep it with your copy of this manual.
- Page 3 HAZARDS OF USING THE LADDER Vestil strives to identify foreseeable hazards associated with the use of its products. However, no manual can address every conceivable risk. The most effective way to avoid injury is to exercise sound judgment when assembling, using, inspecting, and maintaining this ladder.
- Page 4 Rev. 10.24.2019 LAD-PW, MANUAL EXPLODED VIEW: 2, 3, 4, & 5 STEP MODELS LAD-PW-(18/26/32)-2-(P/G); LAD-PW-(18/26/32)-3-(P/G) LAD-PW-(18/26/32)-5-(P/G); & LAD-PW-(18/26/32)-5-(G/P) *NOTE: Diagram shows LAD-MM-2-P [44-006-448] Bill of Materials on following page. Table of Contents Copyright 2019 Vestil Manufacturing Co. Page 4 of 23...
- Page 5 33008 Flat washer, low carbon, USS, ” 33622 Split lock washer, carbon steel, ” 37021 Nylon insert lock nut. Gr. 2, z-finish, ”-18 65127 Cotter pin, z-plated, ”x2” Table of Contents Copyright 2019 Vestil Manufacturing Co. Page 5 of 23...
- Page 6 EXPLODED VIEW: 6 & 7 STEP MODELS LAD-PW-(18/26/32)-6-(P/G) LAD-PW-(18/26/32)-7-(P/G) *NOTE: Diagram shows LAD-PW-18-6-G. 44-006-467 Bill of materials on following page ESD models only: ESD chain attached to D-ring Table of Contents Copyright 2019 Vestil Manufacturing Co. Page 6 of 23...
- Page 7 Nylon insert lock nut. Gr. 2, z-finish, ”-18 37024 Nylon insert lock nut, gr. 2, z-finish, ”-16 65127 Cotter pin, z-plated, ”x2” 40-145-012 Specialty hardware, ESD chain Only present on ESD units. Table of Contents Copyright 2019 Vestil Manufacturing Co. Page 7 of 23...
- Page 8 Diagram shows LAD-PW-18-8-G (44- 006-478). First step and side bracket removed to show ladder lock mechanisms. Bill of materials on following page ESD models only: ESD chain attached to D-ring Table of Contents Copyright 2019 Vestil Manufacturing Co. Page 8 of 23...
- Page 9 Nylon insert lock nut. Gr. 2, z-finish, ”-18 37024 Nylon insert lock nut, gr. 2, z-finish, ”-16 65127 Cotter pin, z-plated, ”x2” 40-145-012 Specialty hardware, ESD chain Only present on ESD units. Table of Contents Copyright 2019 Vestil Manufacturing Co. Page 9 of 23...
-
Page 10: Lad-Pw-(26/32)-11-(P/G)
EXPLODED VIEW: 11 STEP MODELS LAD-PW-(26/32)-11-(P/G) *NOTES: Diagram shows LAD-PW-26-11-G (44-006- 481). First step and side bracket removed to show ladder lock mechanisms. Bill of materials on following page Table of Contents Copyright 2019 Vestil Manufacturing Co. Page 10 of 23... - Page 11 Nylon insert lock nut. Gr. 2, z-finish, ”-18 37021 LAD-PW-26-11-G & LAD-PW-26-11-P LAD-PW-32-11-G & LAD-PW-32-11-P 37024 Nylon insert lock nut, gr. 2, z-finish, ”-16 65127 Cotter pin, z-plated, ”x2” Table of Contents Copyright 2019 Vestil Manufacturing Co. Page 11 of 23...
-
Page 12: Lad-Pw-(26/32)-12-(P/G)
*NOTES: Diagram shows LAD-PW-26-12-G (44-006- 482). First step and side bracket removed to show ladder lock mechanisms. Bill of materials on following page ESD models only: ESD chain attached to D-ring Table of Contents Copyright 2019 Vestil Manufacturing Co. Page 12 of 23... - Page 13 Nylon insert lock nut, gr. 2, z-finish, ”-16 65127 Cotter pin, z-plated, ”x2” **30 44-145-012 Specialty hardware, -ESD chain Outriggers are only used on models LAD-PW-26-12-G & LAD-PW-26-12-P. Table of Contents Copyright 2019 Vestil Manufacturing Co. Page 13 of 23...
- Page 14 Upper hole sealing hole compound to threads Spacer Spring Upper hole Cotter pin Caster bracke Step 2 Step 4 Step 5 Finished assembly Cotter pin installed beneath spacer Table of Contents Copyright 2019 Vestil Manufacturing Co. Page 14 of 23...
- Page 15 Hole for caster stem Caster bracket Step 2: Insert caster stem Step 4: Fasteners installed and tightened Lock nut Washer (37024) (33008) Table of Contents Copyright 2019 Vestil Manufacturing Co. Page 15 of 23...
- Page 16 [6-12 step models] Step 1: Fasten the back leg weldment to the step frame weldment with hardware. Be sure to orient the back leg weldment as shown in the below diagrams. Step frame Back leg weldment weldment 37021 11060 Table of Contents Copyright 2019 Vestil Manufacturing Co. Page 16 of 23...
-
Page 17: Ladder
– 18 hardware as shown below. Fasten each bolt (11055) with a flat washer (33006) and lock nut (37021). Ladder assembly 11055 33006 37021 11055 Wheel bracket Support bracket 37021 Base support Table of Contents Copyright 2019 Vestil Manufacturing Co. Page 17 of 23... - Page 18 16-132-163 Press down on brake lever to lock caster. Lift lever to release brake Return to Using the Ladder 1in. black plastic plug 1in. x 1in. square cap Table of Contents Copyright 2019 Vestil Manufacturing Co. Page 18 of 23...
-
Page 19: Ladder
The following diagrams show an LAD-PW with 6 steps. Shorter units have handrails with just 1 handle bracket. The handrails of taller models have 3 handle brackets. 11060 Handra 37021 Handrail post bracket Handrail bracket Side rail Table of Contents Copyright 2019 Vestil Manufacturing Co. Page 19 of 23... - Page 20 3 before using the ladder. Inspect the ladder before each use for damage, such as unusual wear, deterioration, or corrosion. Tighten loose nuts or replace nuts that cannot be adequately tightened. Table of Contents Copyright 2019 Vestil Manufacturing Co. Page 20 of 23...
- Page 21 • [6-12 step models] Lubricate bolts as necessary for the wheels to rotate freely. • Apply touchup paint wherever the finish is damaged. Apply touchup paint as soon as damage occurs. Table of Contents Copyright 2019 Vestil Manufacturing Co. Page 21 of 23...
-
Page 22: Labeling Diagram
An appropriate place to tie the folder to the frame is on the side rail next to the step where label 821 is applied. Table of Contents Copyright 2019 Vestil Manufacturing Co. Page 22 of 23... -
Page 23: Limited Warranty
Warrantee (you) for warranty service. Who may request service? Only a warrantee may request service. You are a warrantee if you purchased the product from Vestil or from an authorized distributor AND Vestil has been fully paid. Definition of “original part”? An original part is a part used to make the product as shipped to the Warrantee.
Need help?
Do you have a question about the LAD-PW-18-2-P and is the answer not in the manual?
Questions and answers