Basalte Sentido KNX Series Installation Manual

The Sentido switch for KNX is a four way touch sensor using capacitive technology.
The Sentido switch has to be used in combination with the Sentido front covers.
By touching each of the four touch sensitive area's you can use KNX to execute a range of functions incuding switching, dim-
ming, operating blinds, activating scenes, etc.
Touching a touch sensitive area will give a visual feedback by means of lighting up the central RGB led.
The central RGB led can also be controlled by KNX to provide a visual feedback of statuses. The led can also be used to illu-
minate the switch in the dark.
The Sentido switch uses the patented Multitouch technology. Touching more then one touch sensitive area at the same time
activates an additional comfort function wich also can be used by KNX.
Identitifying the parts
A RGB-led
B Programming button
C Programming led
D One of the four touch sensitive area's
E Opening to screw the device into the backbox
F Guide for the Sentido front cover
G KNX connection
Rear
-
+
Before operating the unit, please read this manual thoroughly and
retain it for future reference.
Model No. 200-02
You are cautioned that any changes or modifications not expressly
approved in this manual could void your authority to operate this
equipment.
Caution: The device could become damaged.
Never connect the device to 230V!
Caution: The device may only be installed and connected by profes-
sional electricians. Observe the regulations valid in the country of
use, as well as valid KNX guidelines.
B
A
C
G
F
Sentido KNX
Installation Manual
E
basalte is a registered trademark of Basalte bvba.
Multitouch is a patented technology by Basalte bvba.
Sentido is a registered design of Basalte bvba.
KNX is a registered trademark of the KNX organisation.
© 2008 basalte
Front
D