Download
Share
Print this page
  1. Manuals
  2. Brands
  3. Asante Manuals
  4. Media Converter
  5. AsanteTalk
  6. Frequently asked questions manual

Asante AsanteTalk Frequently Asked Questions Manual

Asante asantetalk converters: frequently asked question
Hide thumbs Also See for AsanteTalk:

Advertisement

Quick Links

Download this manual See also: Troubleshooting Manual, User Manual
AsantéTalk - Frequently Asked Questions
AsantéTalk Power-Up Sequence
Q: Is there an approved power-up sequence for the
AsantéTalk?
A: Yes. In general, turn on all Localtalk devices first: print-
ers, laptops and desktop computers. Once these are
all functioning, do EITHER of the following:. If the
AsantéTalk will be connected to an existing Ethernet
network, connect the silver Ethernet cable to a hub,
bridge or router, and power up the AsantéTalk. If the
AsantéTalk will be connected to an iMac, connect the
yellow crossover cable to both AsantéTalk and iMac,
power up the AsantéTalk, THEN power up the iMac.
Q: All my devices are on the same power strip. When I
start up my iMac in the morning, the iMac won't see
my printer. Why?
A: For each Localtalk device to be accessible via
AsantéTalk, ALL Localtalk devices including Printer and
Computer systems must be powered-up first. This will
enable the AsantéTalk to see each Localtalk node.
Q: How long does it take for the AsantéTalk to power up?
A: It takes approximately 15 seconds for AsantéTalk to
boot and become an active node.
Frequently Asked Questions
Page 1

Advertisement

loading
Need help?

Need help?

Do you have a question about the AsanteTalk and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Asante AsanteTalk

Summary of Contents for Asante AsanteTalk

  • Page 1 AsantéTalk - Frequently Asked Questions AsantéTalk Power-Up Sequence Q: Is there an approved power-up sequence for the AsantéTalk? A: Yes. In general, turn on all Localtalk devices first: print- ers, laptops and desktop computers. Once these are all functioning, do EITHER of the following:. If the AsantéTalk will be connected to an existing Ethernet network, connect the silver Ethernet cable to a hub, bridge or router, and power up the AsantéTalk.
  • Page 2 Q: Why can’t my Powerbook be seen on the Localtalk net- work when I plug it into the network in the morning? A: During its power-up sequence, the AsantéTalk polls the Localtalk network for any available nodes. Nodes which are added after the AsantéTalk is powered on may not be seen.
  • Page 3 Localtalk Network Topology Q: Can I use the AsantéTalk Serial Cable on an Appletalk compatible printer? A: No. The AsantéTalk Serial Cable connector is designed for serial printers and for connecting a Localtalk com- puter to the AsantéTalk. It was not designed to estab- lish a Localtalk network, nor was it designed to communicate with a printer that supports the Apple- talk protocol.
  • Page 4 Q: Is Localtalk topology different from Ethernet topology? A: Yes. Localtalk topology employs a “bus” or “daisy chain” wiring scheme. Ethernet employs a “star” wir- ing scheme. Q: How is a “star” topology different from a “bus” topol- ogy? A: A “Star” topology requires that all cable runs terminate at a central point such as a hub, bridge or router.10BaseT Ethernet is the most common Ethernet used with Appletalk.
  • Page 5 Q: Does it matter where the AsantéTalk resides in the Localtalk network topology? A: Yes. The AsantéTalk provides optimal performance when it resides at the beginning of the Localtalk net- work topology, and is properly terminated. Q: What port do I plug the Localtalk connector into on my Localtalk Macintosh? A: If your Macintosh has a Network Control Panel, you should select Localtalk Built-in and plug your Localtalk...
  • Page 6 Ethernet Questions Q: What do the LED’s (lights) on my AsantéTalk mean? A: There are 4 LED’s on the AsantéTalk to help you with diagnostics. The solid power LED shows the unit is receiving power. The solid green LI (or Link Integrity) LED indicates that a valid connection has been made between the AsantéTalk and another Ethernet device.
  • Page 7 Q: How is a “star” topology different from a “bus” topol- ogy? A: A “Star” topology requires that all cable runs terminate at a central point such as a hub, bridge or router.10BaseT Ethernet is the most common Ethernet used with Appletalk. A “bus” or “daisy chain” topology (such as a Localtalk network uses) connects several devices in a row.
  • Page 8 Q: What type of Ethernet Cable do I need to connect the AsantéTalk to a Switch, Hub, or Bridge? A: An Ethernet cable that is wired as a standard IEEE 10BaseT cable is required. The cable must be a Cate- gory 3 or 5 type and not exceed an overall length of 100 Meters or 328 feet.
  • Page 9 Q: Is the AsantéTalk a Router? A: No. AsantéTalk is simply a Localtalk to Ethernet Con- verter which allows the Apple iMac or other Macintosh systems utilizing the Ethertalk protocol on Ethernet to print and share files with Appletalk protocol compati- ble systems or printers on Localtalk.
  • Page 10 Appletalk Protocol Compatibility Q: What is Appletalk Protocol Compatibility? A: Appletalk Protocol is the “language” used by devices within an Apple network. One of the features of Apple- talk is that devices can be “shared” (accessed by multi- ple users). This protocol is not dependent upon the type of topology (physical connections) used in the network.
  • Page 11 Q: Which driver should I use to access my Appletalk printer? A: Some printers utilize Apple’s Laserwriter icon. Others such as HP and Epson provide both serial drivers and Appletalk drivers for their printers. Consult your printer manufacturer for the correct drivers to use. Frequently Asked Questions Page 11...
  • Page 12 Frequently Asked Questions Page 12...