Table of Contents
Advertisement
Quick Links
Hyperion 3D
Energy-saving solution for industrial doors
Original instructions
1
Safety instructions
• The device may only be connected to a SELV (safety extra low-voltage) system with safe electrical separation.
• The device may only be opened and repaired by your supplier or a qualified technician.
• If automating a manual or semi-automatic door, make sure all required safety devices are existent and operational.
• This equipment is not suitable for use in locations where children are likely to be present.
2
Description of system components
Hyperion 3D-M, Hyperion 3D-S
-M = Master sensor, -S = Slave sensor
Front view
Back view
Hyperion 3D-H
-H = Height sensor
LED display
Connection to
industrial door
control system
Master / Slave
connection
Bottom view
Mounting bracket
Angle fixing screws
Locking washers
Screws (Torx 10) for cable
compartment cover
Cover for cable compartment
Laser distance measurement
Short guide
Battery compartments
Button and status LED
Cover
Label (serial no.)
Caution:
Laser radiation! Do not stare into beam or view directly with optical
instruments.
Laser class 1
According to EN/IEC 60825-1:2014
Invisible laser radiation.
Seal
Blind plug for data cable
Blind plug for control cable
Label (serial no.)
Silica gel
Cable holder
353225G
03/20
1
Advertisement
Table of Contents
Related Manuals for BBC Bircher Hyperion 3D
Summary of Contents for BBC Bircher Hyperion 3D
- Page 1 • If automating a manual or semi-automatic door, make sure all required safety devices are existent and operational. • This equipment is not suitable for use in locations where children are likely to be present. Description of system components Hyperion 3D-M, Hyperion 3D-S -M = Master sensor, -S = Slave sensor Front view ...
-
Page 2: Installation
Box contents Hyperion 3D-2W (2-way kit) Hyperion 3D-H – Sensor – Sensor – Mounting bracket – 4 AA batteries, > 2700 mAh – Control cable master sensor to industrial door control system, 12 m – Data cable master to slave sensor, 10 m –... -
Page 3: Installation Site
COM stop NC 50 mA / 48 V switch. stop NC BBC Bircher AG declines all responsiblity regarding the black COM stop NO use of the digital input. To deactive the door, we recom- blue stop NO mend to switch off (unpower) the door control. -
Page 4: Installation Calibration
Settings Starting up sensor system After connecting the supply voltage to the master sensor: Master / Slave sensor: the LED lights up red continuously, then blinking (approx. 90 s). → The sensor will not accept any commands. When powered for the first time or with unfinished calibration sequence the sensor initiates the calibration sequence automatically. Master / Slave sensor Height sensor Button... -
Page 5: Usage Statistics
Configuration via app “Bircher SmartConnect” The app is available in Google Play Store directly via Bircher SmartConnect The screens are shown with Android 8.0.0 Base Menu 1. Start app Available before scanning QR code (respectively after terminating communication with sensor) Caution: The sensor is inactive while accessed by the app Bircher SmartConnect (blinking red) -
Page 6: Error List
3. b Main screen Configuration Optimize detection settings or other options Do not park vehicles in the path of the moving door. 3. c Main screen Calibration install Error list Troubleshooting Wiring – On door control: Remove automatic closing time-out to prevent forced closing of the door while presence zone still busy. -
Page 7: Troubleshooting
LED signals / troubleshooting Hyperion 3D-M, Hyperion 3D-S A list of previous errors can be found in the mobile app. Description Troubleshooting White Sensor powered, ready for operation Power-up The sensor will not detect objects or react to commands Red blinking Configuration mode The sensor will not detect objects. - Page 8 This device meets the requirements of Part 15 of the FCC regulations and the RSS-210 standard of Industry Canada. Warning: Changes or modifications made to this device may void the FCC authorisation to operate this device. Contact BBC Bircher Smart Access, BBC Bircher AG, Wiesengasse 20, CH-8222 Beringen, www.bircher.com Made in Switzerland...
Need help?
Do you have a question about the Hyperion 3D and is the answer not in the manual?
Questions and answers