Chauvet It's Green Thinking EZ rail RGBA Quick Reference Manual page 3

EN
Description
Overview
AC Power
Power Linking
Fuse
Replacement
Infrared Remote
Control (IRC)
Mounting
Mounting
Diagram
The EZrail™ RGBA is a linear RGBA fixture with a rechargeable lithium
battery. Control options include Sound-Active mode, automatic programs,
Master/Slave mode, DMX, and included Infrared Remote Control (IRC). Six
personality choices are available through 2-, 4-, 5-, 8-, 10- and 18-channel DMX
modes.
Power Switch
DMX In
DMX Out
This product has an auto-ranging power supply that can work with an input
voltage range of 100~240 VAC, 50/60 Hz.
You can link up to 32 EZrail™ RGBA products at 120 VAC and 64 units at
230 VAC.
1. Disconnect the product from power.
2. Wedge the tip of a flat-head screwdriver into the slot of the fuse holder.
3. Pry the safety cap out of the housing.
4. Remove the blown fuse from the clip on the front of the safety cap and
replace with a fuse of the exact same type and rating.
5. Re-insert the fuse holder and reconnect power.
The EZrail™ RGBA is fully compatible with the Infrared Remote Control
(IRC) from CHAUVET®. For more information on the IRC or to download
instructions, go to www.chauvetlighting.com.
Before mounting this product, read the Safety Notes.
Mounting Clamp
Hanging/Mounting
Bracket
Microphone
Display
Control Buttons
Safety Cable
Bracket AdjustmentKnobs
3
EZrail™ RGBA QRG
Power In
Safety Loop
Power Out
Fuse Holder
Back Panel View
Floor Mount
(2x)