Before Use - Taurus CUTMASTER Manual

spare parts or accessories are used to replace
existing parts/accessories.
- Any misuse or failure to follow the instruc-
tions for use renders the guarantee and the
manufacturer's liability null and void.
INSTRUCTIONS FOR USE

BEFORE USE:

- Make sure that all the product's packaging has
been removed.
- Before using this product for the first time, it is
advisable to test it without food.
- Before using the product for the first time, clean
the parts that will come into contact with food in
the manner described in the cleaning section.
- Some parts of the appliance have been lightly
greased. Consequently, the first time the
appliance is used a light smoke may be detec-
ted. After a short time, this smoke will disappear.
USE:
- Unroll the cable completely before plugging it in.
- Connect the appliance to the mains.
- Place the food on the lower support platform
and fix the food pusher, which will hold the food
item in place.
- Adjust the thickness of the slice using the thick-
ness control dial.
- Turn the appliance on, by using the on/off switch.
- Using the food pusher slide the food towards
the blade.
ONCE YOU HAVE FINISHED USING THE
APPLIANCE:
- Turn the appliance off, using the on/off switch.
- Unplug the appliance from the mains.
- Clean the appliance.
CLEANING
- Disconnect the appliance from the mains and
allow it to cool before undertaking any cleaning
task.
- Clean the equipment with a damp cloth with a
few drops of washing-up liquid and then dry.
- Do not use solvents, or products with an acid or
base pH such as bleach, or abrasive products,
for cleaning the appliance.
- Never submerge the appliance in water or any
other liquid or place it under running water.
- During the cleaning process, take special care
with the blade, as it is very sharp.
- It is advisable to clean the appliance regularly
and remove any food remains.
- If the appliance is not in good condition of clean-
liness, its surface may degrade and inexorably
affect the duration of the appliance's useful life
and could become unsafe to use.
- Neither parts of this appliance are suitable for
cleaning in the dishwasher.
- Dry all parts before its assembly and storage.
TO DISASSEMBLE THE BLADE:
- The blade can be removed for cleaning. To do
so, unscrew the the plastic bold in the center
of the blade (Fig 1.). After cleaning, install the
blade again in its palce.
ANOMALIES AND REPAIR
- Take the appliance to an authorised technical
support service if product is damaged or other
problems arise. Do not attempt to disassemble
or repair the appliance yourself as this may be
dangerous.
FOR EU PRODUCT VERSIONS AND/OR IN
CASE THAT IT IS REQUESTED IN YOUR
COUNTRY:
ECOLOGY AND RECYCLABILITY OF THE
PRODUCT
- The materials of which the packaging of this
appliance consists are included in a collection,
classification and recycling system. Should you
wish to dispose of them, use the appropriate
public recycling bins for each type of material.
- The product does not contain concentrations of
substances that could be considered harmful to
the environment.
This symbol means that in case you wish
to dispose of the product once its working
life has ended, take it to an authorised
waste agent for the selective collection of
Waste from Electric and Electronic
Equipment (WEEE).
- This appliance complies with Directive 2006/95/
EC on Low Voltage, Directive 2004/108/EC
on Electromagnetic Compatibility, Directive
2011/65/EC on the restrictions of the use of
certain hazardous substances in electrical and
electronic equipment and Directive 2009/125/
EC on the ecodesign requirements for energy-
related products.