Labtech LBI-150E Operating Manual page 3

If the power cable or terminal is damaged, stop using it and contact a service center.
●
-There is a risk of electric shock, or injury.
Do not bend the power cable excessively or press it with heavy objects to prevent damage.
●
-There is a risk of electric shock, or injury.
Do not touch the circuit breaker or power source with wet hands.
●
-There is a risk of electric shock, or fire
Please be sure to ground for safety.
●
- If not, there is a risk of electric shock in case of malfunction or short circuit
Be sure to check the rated voltage when installing
●
- 220/230 V ~, 50 or 60 Hz, single phase.
- If the voltage or rating does not match, it may cause fire or electric shock, and if used in
combination with other equipment, it may cause abnormal heat generation and fire.
The figures, diagrams and numeric values used in this manual are only for the purpose of
●
illustration.
CO., LTD. is not responsible for any damage or injury that is caused as a result
● DAIHAN LABTECH
of using this equipment, equipment failure of indirect damage.
No portion of this document may be reprinted, copied, stored, and retrieved through any
●
electronic, optical or other means without prior written approval from DAIHAN LABTECH CO.,
LTD.
Your equipment are 220/230V~, 50 or 60 Hz, SINGLE PHASE.
●
To reduce the risk of electric shock, do not open the body and no user serviceable parts inside.
●
Do not put flammable, volatile or explosive materials inside of the chamber.
●
WARNING
- 3 -
CAUTION