-40°C ≤ Tamb. ≤+80ºC, IP66 WIRING The TX200™ transmitter utilize a bonded foil strain gage bridge sensor to detect and continuously monitor pressure in a system. The strain gage is a resistive element whose resistance changes with the amount of strain DISCONNECT ALL SuPPLY CIRCuITS bEFORE WIRING uNIT.
(Pcal). Cal# is the amount of pressure simulated by turning the shunt cal on. The value is engraved on the TX200 housing and written on the Certificate of Calibration. Pcal is the desired (user defined) full-scale pressure recalibration point.
Page 4
Dimensions Dimensial drawings for all models may be found at www.ueonline.com Pressure Connection Chart Length Code Description “A”in “B”in [mm] 1/4” NPT (female) 15/16 0.54 [13.7] 1/2” NPT (female) 1-3/8 1.01 [25.7] 1/2” NPT (male) 15/16 1.26 [32.0] HF4 Autoclave (female) 15/16 0.54 [13.7] FH6 Autoclave (female)
Page 5
RECOMMENDED PRACTICES AND WARNINGS united Electric Controls Company recommends careful consideration of the following factors when specifying and installing uE pressure and temperature units. Before installing a unit, the Installation and Maintenance instructions provided with unit must be read and understood.