Table of Contents
Advertisement
SAFETY:
READ ALL INSTRUCTIONS BEFORE USE. FAILURE TO
FOLLOW THESE PRECAUTIONS COULD RESULT IN INJURY TO
YOURSELF AND OTHERS
1.
When this appliance is to be positioned in close proximity to a
wall, partitions, kitchen furniture, decorative finishes, etc. it is
recommended that they be made of non-combustible material. If
not, they shall be clad with a suitable non-combustible heat
insulating material, and the closest attention be paid to fire
prevention regulations.
2.
Do not use an appliance that is damaged, leaking or which does
not operate properly.
3.
Ensure that the gas cylinder is connected or changed in well
ventilated area,preferably outdoor, away from any source of
ignition as open flames, and away from other people.
4.
Keep gas cylinder away from heat and flames. Do not place on
a stove or any other hot surface.
5.
Ensure that the assembled unit is stable and does not rock.
6.
Do not cover or change the primary air supply apertures in the
burner as this will affect the performance of the product and may
lead to unstable flames.
7.
If there is a leak on the appliance (smell of gas), turn off the gas
supply, first at the control valve on the cylinder and then on the
appliance by turning the control knobs fully clockwise.
8.
If you wish to check for leaks on your appliance, do it outside. Do
not try to detect leaks using a flame. The correct way is to smear
the joint with soapy water. If bubbles form, then there is a gas
eak. Immediately turn off the gas supply first closing the control
valve on the gas cylinder and then the appliance valves. Check
that all the connections are properly filted. Re-check with soapy
water. If a gas leak persists, return the product to your dealer for
inspection/repair.
9.
Do not modify the appliance or use it for anything other than what
it has been designed.
10. During use, part of the appliance will become hot, particularly the
cooking areas and top. Avoid touching hot parts with your bare
hands. The use of oven gloves is recommended.
12. Keep young children away from the appliance at all times.
13. This appliance consumes oxygen and needs ventilation for
optimum performance and for the safety of those in close
.
proximity
7
Hot surfaces and food can burn skin. Allow the hot surfaces to cool
before handling
DAILY CLEANING AND MAINTENANCE
There are no predetermined maintenance intervals for this appliance
but the following should be observed.
1. Inspect hoses and replace if they are not in order, before using the
appliance as cracked and perished hoses can be dangerous replace
if necessary with hoses as detailed in point 5.
2. Allow the appliance to cool sufficiently before attempting any
maintenance.
3. The appliance is fitted with a jet to regulate the correct amount of
gas. The small hole in the jet may become blocked, resulting in a
small flame or no flame on the burner. To clean, unscrew it from
the appliance
Clean the jet by blowing the hexagon end, or by using a jet
cleaner. Do not attempt to clean the jet with a sharp object, as this
will damage the very small jet aperture and cause the unit to
malfunction. If the jet still does not function, replace it with a new
jet of the correct size. To re-assemble, reverse the above
procedures.
4. Check that the flexible hose is completely connected over the
nozzles at each end of the tubing and that it is held firmly in place
by hose clamps. Examine the flexible hose regularly, at least each
time the gas cylinder is changed and ask your dealer to fit a new
LPG hose if it becomes perished, worn or damaged.
5. Only LPG hose that complies with SANS 1156-2 or BS 3212 may be
used with this appliance.
WARNING
Burn Hazard.
Do not touch hot food,liquid or heating surfaces
while equipment is heating or operating
THIS APPLIANCE SHOULD NOT BE CLEANED WITH A
WATER JET OR IMMERSED IN WATER.
6
Advertisement
Table of Contents
