R-Biopharm Lumitester PD-20 Brief Informations

Data transfer
From Lumitester PD-20
• Use a new Lucipac Pen for each measurement.
• With Lumitester PD-20 up to 2,000 measurements can be
performed which will be saved as separate data sets within
the data memory of the device.
By connecting Lumitester PD-20 to a computer the data can
•
be uploaded and saved.
• To transfer the data to Microsoft Excel open the programme
first and click on "Data" in the menu bar, then click on
"Import Data". The assistant for import of data will guide you
through converting the data into the table form desired.
R-Biopharm AG
An der neuen Bergstraße 17, 64297 Darmstadt, Germany
Phone: +49 (0) 61 51 - 81 02-0, Fax: +49 (0) 61 51 - 81 02-40
E-mail: info@r-biopharm.de, www.r-biopharm.com
Equipment / Software / Accessories
Flowchart
AMP/ATP measurement with LuciPac Pen and
Lumitester PD-20
• Prior to performance of the first test with
LuciPac Pen and Lumitester PD-20 read the
instructions for preparation of the device and
follow the steps for installation which are
described within the instruction manual.
• The manual can be found on the CD which is included
in the package. The manual also contains a detailed
description of the handling of the device.
• Please note that the control software has to be
installed first before connecting the Lumitester PD-20
to a computer.
• The driver software will be installed after the
connection has been made.
• Instructions for installation are included in
the instruction manual for the control
software.
R-Biopharm – for reliable analysis.
Brief information