Advertisement
TKM, Inc MX170B NAV/COMM
Controls & Indicators
Control
Top Left
COMM F-F
TEST
Lower Left
NAV F-F
VC-ID
COMM Displays
Upper VOL knob
NAV Displays
Lower VOL knob
25
N-C
VT
MHz knob
KHz knob
3/20/06
MX170B Operation
Use – Normal
Flips Active and Standby
COMM frequencies
Squelch
Flips Active and Standby
NAV frequencies
NAV Voice filter
Left is Active
Right is Standby
(Note: Tic to upper left of
121.50)
Power off/on, COMM
volume
Left is Active
Right is Standby
NAV power off/on, NAV
volume
Adds 25 KHz to Standby
COMM frequency
Toggle selection knobs
between Standby NAV and
COMM
Alter MHz setting on
Standby display with Tic
Alter KHz setting on
Standby display with Tic
Use – Edit
Next preset
Previous preset
Insert preset
Delete preset
Select edit mode on power
up
1/3
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for TKM MX170B
Summary of Contents for TKM MX170B
- Page 1 TKM, Inc MX170B NAV/COMM MX170B Operation Controls & Indicators Control Use – Normal Use – Edit Top Left Flips Active and Standby Next preset COMM F-F COMM frequencies TEST Squelch Previous preset Lower Left Flips Active and Standby...
- Page 2 TKM, Inc MX170B NAV/COMM Basic Operation Refer to the photo for placement of the controls and displays. The left hand COMM readout indicates the active COMM frequency; the right hand readout indicates the standby one. The left hand NAV readout indicates the active NAV frequency; the right hand readout indicates the standby one.
- Page 3 Advanced Operation The MX170B allows up to 50 NAV and 50 COMM frequencies to be stored in memory for recall. These preset frequencies remain in memory after the unit is powered down. Clear Presets. To erase all frequency presets, turn on power to the unit while depressing the TEST button.
Need help?
Do you have a question about the MX170B and is the answer not in the manual?
Questions and answers