Nelson R55VT Manual

If the shaft or motor of the R55VT is worn or damaged the plate will not rotate properly. The plate/motor
assembly can be replaced using this kit.
Retaining
Ring
REPLACEMENT INSTRUCTIONS
1
4
Secure plate/
motor assem-
bly to body by
replacing the
retaining ring.
WARRANTY AND DISCLAIMER: Nelson R55VT & R55i VT End of Pivot Sprinklers are warranted for one year from the date of original sale to be free of
defective material and workmanship when used within the working specifications for which the products were designed and under normal use and service.
The manufacturer assumes no responsibility for installation, removal or unauthorized repair of defective parts and the manufacturer will not be liable for
any crop or other consequential damages resulting from any defects or breach of warranty. THIS WARRANTY IS EXPRESSLY IN LIEU OF ALL OTHER
WARRANTIES, EXPRESS OR IMPLIED, INCLUDING the warranties of merchantability AND FITNESS FOR PARTICULAR PURPOSES AND OF ALL OTHER
OBLIGATIONS OR LIABILITIES OF MANUFACTURER. No agent, employee or representative of the manufacturer has authority to waive, alter or add to the
provisions of this warranty nor to make any representations or warranty not contained herein.
Nelson Irrigation Corporation / 848 Airport Road, Walla Walla, Washington 99362 U.S.A.
Tel: +1 509.525.7660 / Fax: +1 509.525.7907 / info@nelsonirrigation.com / nelsonirrigation.com
848 Airport Road, Walla Walla, Washington 99362 U.S.A. / Tel: +1 509.525.7660 / Fax: +1 509.525.7907 /nelsonirrigation.com
R55 VT / R55i VT End of Pivot Sprinkler
Plate/Motor
Assy
2
Remove
nozzle
from
body.
5
Plate/Motor Replacement Kit
#13161 R55 VT PLATE/MOTOR KIT
R55 VT Blue Plate/Motor Assembly
Retaining Ring
#13163 R55i VT PLATE/MOTOR KIT
R55i VT Green Plate/Motor Assembly
Retaining Ring
NOTE: For R55 and R55i, use kits #12437 and
#12654, respectively.
3
Remove retaining
ring using snap-
ring pliers.
6
NOTE: If you have a version of the
R55VT with a spacer, replace it with
the new spacer included in this kit.
Otherwise disregard.
Reinstall
the nozzle
in body.
R55VT-PLATE/MOTOR KIT 3/19
QTY
1
1
QTY
1
1
Remove old plate/motor assembly
from body, and insert new plate/
motor assembly.