Advertisement
STEP 11
Preparing the Mower Lift for Storage
• Remove the Push Pins
Wheel Pads
to the narrowest position
2
and reinsert the Push Pins.
• Lower the Mower lift until the Wheel
Pads are firmly on the ground.
• Place the Crank Handle in the
storage clips.
THE LIFT IS NOW READY FOR STORAGE OR TRANSPORT.
• Before each use, always check for any
worn, loose or damaged parts on the mower
lift. If any damaged parts are present, do
not use the Mower lift and contact customer
service at 1-888-376-9601.
• Clean and oil the screw thread after every
50 uses or at least once a year using light
machine oil.
• Place lithium grease between all the pivot
points after every 50 uses or once a year.
• Add a few drops of light machine oil to the
Thrust Bearing after every 50 uses or once
a year.
HZR350 RIDING MOWER LIFT
OPERATING INSTRUCTIONS
, slide the
5
MAINTENANCE SCHEDULE
Push Pin 5
2
Wheel Pad
13
Storage Clips
Oil Thrust
Bearing
Clean and oil
Screw Thread
Grease all
pivot points
Advertisement
