Advertisement
STEP 9
Removing the Mower from the Mower Lift
• Remove the Safety Straps from front mower tires.
• Drive or roll the mower off of the Wheel Pads.
STEP 10
Raising the Mower Lift with a power drill (optional)
The mower lift can be raised or lowered by using a
variable speed corded drill (7 amp minimum) or variable
speed cordless drill (18V minimum).
• The drill will require a 3/8" square driver (not included).
• Remove Crank Handle.
• Firmly insert the 3/8" square driver in the Square
Receiver. Rotate the drill reverse (counterclockwise)
to raise the Lift Arm and rotate the drill in forward
(clockwise) to lower the Lift Arm.
• Locking Bar must be lifted and held up until it
clears the last notch during lowering.
Operator must have a firm grip on the drill before
raising or lowering the Lift Arm.
• Follow all other operating instructions while using the
drill attachment.
• Replace the Crank Handle as necessary for future use.
HZR350 RIDING MOWER LIFT
OPERATING INSTRUCTIONS
12
3/8" Square
Driver
Advertisement
