Ⅴ. Operation Introduction
1.APP Operation Introduction
1.There are two indicators :
On the left is a monochrome indicator. When no essential oil is
detected, it lights up in yellow and blinks continuously; on the
W /
277
right is a two-color indicator (blue, green). During the working
S
B
P /
10
S
period, the green light is on and the blue light is on for long time
Shift
Back
when machine is beyond working time.
The device has four buttons : "
Enter
Add
is confirmation button, "
is the shift button.
2.Buttons operation:
Under the normal working interface, press "
password setting interface.
3.Under the normal working interface, press "
the essential oil detection function.
4.Under the normal working interface, press "
5.Under the normal working interface, press "
time setting interface.
6.Under the normal working interface, press "
setting interface.
7.Under the normal working interface, long press "
8.Under the normal working interface, long press "
Factory Reset:
Under the normal working interface, firstly, press the "
the interface show YES/NO, then let your hand go. Secondly ,operate "
"
" button to confirm it and finish the setting.
2.Stand-alone version operation instruction
1.There are two indicators :
On the left is a monochrome indicator. When it detects theit
there is No essertial Oil it lights up in yellow and blinks
Shift
Back
continuously; on the right is a two-color indicator (blue,
green). During the working period, the green light is on and
the blue light is on for long time when machine is beyond
Enter
Add
working time.
2.Button operation instruction:
Under the normal working interface, press "
factory settings can be restored until the display shows the full display and then release the
button.
Under the normal working interface, press "
on/off the essential oil detection function.(if the indicator is lighting up in yellow ,press "
and "
" buttons to close the essential oil detection function.
Under the normal working interface, press "
setting interface,the frequency (w) and the pause time (P) are adjustable, the adjustable value
range are 5~300 seconds (S).
Under the normal working interface, press "
the day and frequency setting interface., press "
set and press the "
" button to confirm the start and end working time and working frequency
setting ,the working time period. 01 indicates the first working time setting, and there are three
working time and frequency settings.
Under the normal working interface, press "
local time setting interface.
" is the return button"
" is the increasing button and "
" and "
" buttons at the same time to enter the
" and "
" buttons at the same time to turn on/off
" button to adjust the concentration level A,B and C.
" and "
" buttons at the same time to enter local
" button to enter the working time and frequency
" button to turn on/off the fan.
" button to turn off the machine.
" and "
" buttons at the same time until
" to choose YES then press
" and "
" buttons at the same time, the
" and "
" buttons at the same time to turn
" button to enter the working time and frequency
" button to enter start and end working time of
" button to select the day of the week to be
" and "
" buttons at the same time to enter
Under the normal working interface,long press to enter the working time and frequency setting
for the whole week, press "
set the displacement. After finishing, press "
Under the normal working interface, long press the "
state (off state), and long press again to start the machine normally.
Under the normal interface, press "
password setting. After the setting is completed, confirm and exit the interface.
After the device has no operation and enters standby mode, it needs to be entered password
"
again.
"
Under the normal working interface, long press "
function setting.
Ⅵ.Accessories and spare parts
Please clean the equipment periodically,suggest 2-3 months in 1 circle , so that it can work
under best condition.
Please cut off the power when cleaning, also do not use wet hand to operate it directly, in
case of electric shock and injury.
1.Long-term non-use
(1) Please turn off and cut off the power then roll up the power cord.
(2) Clean the filter components.
(3) Place the deodorant package which contains activated carbon in the device or package, to
prevent residual substances in the equipment produce odor.
(4) Please equip the machine with the dust cover, placed in the shade, ventilative place.
Ⅶ.Accessories and spare parts
Name
Quantity
Aroma diffuser
Adapter
Cap
Air conditioning tube
Key
Pneumatic fittings
"
Ⅷ. After-sales Service
1.Provide free technical solutions and installation process guidance.
2.Provide free online FAQ consultation and scent-marketing suggestion.
Ⅸ. The equipment warranty and precautions
1.The equipment warranty period is 12 months (from the date of sale).
2.Please provide the warranty card,Invoice or other provement which can prove the
equipment was ordered in our company to enjoy the free maintenance.
3.The human error or other wrong operation cause the fault not belong to the scope of
warranty, and will not be accepted to provide free maintenance.
" button to select the setting time period. press "
" button to confirm the setting and exit.
" button to enter the device sleep
" and "
" buttons at the same time to enter the
" button to turn off or turn on the fan
Name
Screws (including plastic
1PC
expansion tube)
1PC
Manual
1PC
Warranty card
1PC
Bottle sealing gasket
2PC
Mounting strip
1PC
" button to
Quantity
2PC
1PC
1PC
1PC
1PC
Need help?
Do you have a question about the Airing6-S and is the answer not in the manual?