Opel Vivaro Owner's Manual page 229

4. While holding the light assembly,
push the retaining lug which holds
the tail light assembly in the body.
5. Carefully withdraw the tail light
assembly from recess and
remove. Take care that the cable
duct remains in position.
6. Detach the cable from the retainer
in the light assembly.
7. Disengage the central retaining
lug, pull the bulb carrier and
disengage the remaining retaining
lugs.
Vehicle care
8. Push the bulb slightly down, turn
it and remove it from the bulb
carrier. Replace the bulb:
Tail light / parking light (1)
Reverse light (2)
Brake light / parking light (3)
Turn light / hazard warning flasher
(4)
9. Attach the bulb carrier to the light
assembly.
10. Attach the cable to the retainer.
11. Attach the light assembly to the
vehicle body and tighten both
screws.
227