ABB M2231 Product Manual page 36

4. Visual doorbell
Overview
In some case, there is no camera on the outdoor station. When the doorbell is pressed, you
want the indoor station to display the image from the designated camera connected to the
camera interface.
Precondition
The camera is connected to the camera interface.
■
■ Camera interface works at "mode=4" and is related to the indoor station. Please see the
product manual of camera interface for more details.
Enable the "Visual doorbell" function
ON
Please follow the steps below:
[1] In standby status, press "
[2] Press " " or "
camera list.
[3] Press " " or "
detailed settings.
Product manual 2TMD041600D0107
CAMERA LIST
Enable the cameras
Outdoor1-1
Outdoor1-2
Camera1
( )
( )
" button to access the operation screen.
" on the left list and then press " √ " to access the
" to select "
" to select the designated camera, and then press " √ " to access the
Commissioning
1/1
1
│36