72
Add
Rule settings for filtering appear.
Enter each item
Save
Set rules are saved and filtering is set.
・To set an IPv6 address, enter a prefix at the end of the IP address.
・ If type is "Whitelist," and status is
connection is allowed. An unset IP address is filtered, and connection is rejected.
・ If type is "Blacklist," and status is
deactivating filtering. Filtering is not canceled. If set to
connection is allowed.
Disconnect
, the set IP address is filtered, and connection is rejected. If set to
Connect
, the set IP address is not filtered, and connection is allowed. Use for temporarily
Disconnect
, connection is rejected. An unset IP address is not filtered, and
Connect
,