Device Recognition/Removal On Mac; Installing/Uninstalling Driver (Mac) - Zte A002ZT User Manual

16
Device Recognition/Removal on
Mac
Device Recognition (Mac)
When connecting USB modem to a Mac for the first time,
install (set up) the driver.
Connect to Mac's USB port.
Mac should recognize USB modem within a few seconds.
Device Removal (Mac)
Stop the connection, and check that data uploading/
downloading is completed before removing USB modem.
Stop the connection, and check that data uploading/
downloading is completed.
Remove USB modem from Mac
USB modem is removed.
Cautions for Removing USB Modem
Before Entering Sleep Mode
USB modem may malfunction if Mac enters Sleep mode
with it connected. Be sure to remove USB modem before
leaving Mac unattended, etc. USB modem may malfunction
if connected before Mac starts/restarts. Remove USB
modem before starting/restarting Mac.
WEB UI
Exit WEB UI before removing USB modem. Do not remove
USB modem during transmissions.
Installing/Uninstalling Driver
(Mac)
Screenshots and steps described here are for Mac OS X
10.15.4.
Depending on your operating system or environment, shown
screens and messages may differ.
Installing the Driver in Mac
Connect to Mac's USB port
"ZTEMODEM" icon appears on desktop and "A002ZT
Hostless Modem" folder automatically opens.
・ If no icon appears click
Double-click A002ZT Hostless Modem
Enter user name and password
Driver is installed.
ZTEMODEM.
OK