Features & Controls; Control Functions - Simplicity Regent Series Operator's Manual

Features & Controls
12V

Control Functions

The information below briefly describes the function of individual controls. Starting, stopping, driving, and mowing
require the combined use of several controls applied in specific sequences. To learn what combination and sequence
of controls to use for various tasks see the OPERATION section.
Throttle Control
The throttle controls engine speed. Move the throttle forward to
increase engine speed and back to decrease engine speed.
Always operate at FULL throttle.
Choke
Close the choke for cold starting. Open the choke once the
engine starts. A warm engine may not require choking. Move
the lever forward to close the choke.
Headlights
The light switch turns the tractor headlights on and off.
Hour Meter (Select Models)
The hour meter measures the number of hours the key has
been in the RUN position.
12
Figure 1.