Advertisement
Available languages
Available languages
IMPORTANT SAFETY INSTRUCTIONS
Use only a pressure-regulated compressed air source to limit the air pressure
supplied to the tool. The regulated pressure must not exceed 110 PSI. If the
regulator fails, the pressure delivered to the tool must not exceed 120 PSI. The
tool could explode which will cause death or serious personal injury.
Always disconnect air resource:
a) Before making adjustments.
b) When servicing the tool.
c) When clearing a jam.
d) When tool is not in use.
e) When moving to a different work area, as accidental actuation may occur,
causing injury.
Never connect tool to an air source that may exceed 200 PSI. Over
pressurizing the tool may result in bursting, abnormal operation, breakage of the
tool or serious injury to persons. Use only clean, dry, regulated compressed air
at the rated pressure or within the rated pressure range as marked on the tool.
Always verify prior to using the tool that the air source has been adjusted to the
rated air pressure or within the rated air-pressure range.
SPECIFICATIONS
The HAUSSMANN XPERT coil nailer is a light duty, coil fed, pneumatic nailer, using
compressed air as a power source. Ideal for roofing, underlaying, wall sheathing,
framing and recreational decks. High-capacity magazine can fasten a full bundle of
shingles. Lightweight and well balanced for easy operation.
Shoots standard 0.098" to 0.12" (2.5-3.05 mm) diameter, 3/4" to 1-3/4" (19-45 mm)
length, 15 degree wire-collated coil roofing nails.
3/8 po (9,5 mm)
1/8 po (3,05 mm)
Min.
Operating pressure: 70 - 110 PSI
Max. Pressure: 120 PSI
Magazine capacity: 120 Nails
Air Inlet: 1/4" (6 mm) NPT
ACCESSORIES INCLUDED
Safety goggles
Air tool oil
4 Hex keys
Carrying case
20
PNT147-R
3/8 po (9,5 mm)
15
o
5/16 po (7,9 mm)
1/8 po (3,05 mm)
Max.
15
o
5/16 po (7,9 mm)
Fig.1
Advertisement
