Set-Up; Installation - Apricorn Aegis Portable A25-USB 160GB User Manual

3. s -u
eT

Installation

Windows 2000, XP and Vista:
1. Ensure your computer is turned on.
2. Plug the Aegis Portable USB or FireWire cable into the appropriate open
port on your computer.
3. The "New Hardware Found" message will appear briefly on your computer
screen.
4. Windows 2000, XP and Vista will install the device drivers included with the
operating system. No user intervention is required.
Macintosh:
1. Ensure your computer is turned on.
2. Plug the Aegis Portable USB or FireWire cable into the appropriate open
port on your computer.
3. The operating system will automatically mount the drive and it will appear on
your computer.
Note for USB 2.0 only: In the rare case that the Aegis Portable does
not power up on a single USB connection, the included USB Y-cable
may be required (Pictured above). Simply plug the two Y-cable USB
connectors (black and grey connectors) into the two USB ports on your
notebook, connect the Aegis Portable, and the Aegis Portable will power.
P
USB Y-cable
(USB model only)
www.apricorn.com