Inspection Checklist; Warranty - Task Force Tips FM Series Instructions For Safe Operation And Maintenance

Fixed gallonage tip
Table of Contents

Advertisement

11.0 INSPECTION CHECKLIST

Nozzle must be inspected before each use for proper operation and function according
to this checklist. Check that:
1)
There is no obvious damage such as missing, broken or loose parts, damaged labels, etc.
2)
Coupling is tight and leak free
3)
Valve handle moves freely though full range and shuts off flow
4)
Nozzle flow is adequate as indicated by pump pressure and nozzle reaction
5)
Shaper turns freely and adjusts pattern through full range
6)
Nozzle moves smoothly in and out of flush position
WARNING

12.0 WARRANTY

Task Force Tips, Inc., 2800 East Evans Avenue, Valparaiso, Indiana 46383 ("TFT") warrants to the original purchaser of its
Ultimatic, Mid-Matic, and Handline series nozzles ("equipment"), and to anyone to whom it is transferred, that the
equipment shall be free from defects in material and workmanship during the five (5) year period from the date of
purchase.
TFT's obligation under this warranty is specifically limited to replacing or repairing the equipment (or its parts) which are
shown by TFT's examination to be in a defective condition attributable to TFT. To qualify for this limited warranty, the
claimant must return the equipment to TFT, at 2800 East Evans Avenue, Valparaiso, Indiana 46383, within a reasonable
time after discovery of the defect. TFT will examine the equipment. If TFT determines that there is a defect attributable to
it, TFT will correct the problem within a reasonable time. If the equipment is covered by this limited warranty, TFT will
assume the expenses of repair.
If any defect attributable to TFT under this limited warranty cannot be reasonably cured by repair or replacement, TFT
may elect to refund the purchase price of the equipment, less reasonable depreciation, in complete discharge of its
obligations under this limited warranty. If TFT makes this election, claimant shall return the equipment to TFT free and
clear of any liens and encumbrances.
This is a limited warranty. The original purchaser of the equipment, any person to whom it is transferred, and any person
who is an intended or unintended beneficiary of the equipment, shall not be entitled to recover from TFT any
consequential or incidental damages for injury to person and/or property resulting from any defective equipment
manufactured or assembled by TFT. It is agreed and understood that the price stated for the equipment is in part
consideration for limiting TFT's liability. Some states do not allow the exclusion or limitation of incidental or consequential
damages, so the above may not apply to you.
TFT shall have no obligation under this limited warranty if the equipment is, or has been, misused or neglected (including
failure to provide reasonable maintenance) or if there have been accidents to the equipment or if it has been repaired or
altered by someone else.
THIS IS A LIMITED EXPRESS WARRANTY ONLY. TFT EXPRESSLY DISCLAIMS WITH RESPECT TO THE
EQUIPMENT ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND ALL IMPLIED WARRANTIES OF FITNESS
FOR A PARTICULAR PURPOSE. THERE IS NO WARRANTY OF ANY NATURE MADE BY TFT BEYOND THAT
STATED IN THIS DOCUMENT.
This limited warranty gives you specific legal rights, and you may also have other rights which vary from state to state.
TASK FORCE TIPS, Inc.
Any nozzle failing any part of the inspection checklist is unsafe and must have the
problem corrected before use. Operating a nozzle that fails any of the above inspections
is a misuse of this equipment.
2800 East Evans Avenue • Valparaiso , IN 46383-6940
800-348-2686 • 219-462-6161 • Fax 219-464-7155
LIN-040 April 2, 2002 Rev 0

Advertisement

Table of Contents
loading

Table of Contents