Advertisement
Step 3: Attach Center
Leg (I) to Table Top with
Small Bolts (G). Do not
tighten completely.
I
J
Step 6: Attach Type A Side Stringer (K) to Center Leg (I). Use Large
Bolts (B) to secure. Attach Type B Side Stringer (L) to Center Leg (I)
with Large Bolts (B). Bolts will thread into Cams, but be careful not
to overtighten–Cams may crack wood.
K
Step 7: Attach Side Legs (H) to
Center Stringer and Side Stringers
H
with Large Bolts (B). Then secure
Legs to Table Top with Small Bolts
(G). Do not secure to Table Top
completely until all Bolts are in place.
Be sure to tighten all Bolts after
assembly is completed. Do not
overtighten.
Any problems or questions call Regency Office Furniture at 1-866-816-9822
Step 4: Attach Type A Center Stringer
(M) to Center Leg (I). Use Type A
Medium Bolt (D) for top hole, Type B
(E) for bottom. Do not overtighten.
I
M
I
K
I
Step 5: Attach Type B Center
Stringer (N) to Center Leg (I). Use
(D) Bolts for top hole, (E) for
bottom. Do not overtighten.
N
I
M
I
I
L
K
Step 8: Insert Lag Bolts
(F) into Side Stringers
and secure to Table Top.
I
Advertisement
