Height adjustable electric desk with glass top + dual usb charger (28 pages)
Summary of Contents for Seville Classics airLIFT Elite Gaming eSport Computer Desk OFF65924
Page 1
Elite Gaming eSport Computer Desk Model: OFF65924 Thank you for choosing Seville Classics! We hope that you enjoy your computer gaming table! Please read through this user guide for parts list, assembly instructions, frequently asked questions and further contact information.
Parts List 1. Left Side Frame 2. Right Side Frame 3. Left Support 4. Right Support 5. Wire Tray Bottom 6. Wire Tray Back 7. Crossbar 8. Hanger Hook 9. Left Shelf 10. Desk Top 11. Right Shelf 12. Cup Holder 13.
Page 3
Assembly Instructions STEP 1. Screw FEET (A) into SIDE FRAMES (1, 2). Holes on the inside of frames should face each other. STEP 2. Use 4 mm hex key (I) to install all screws. Connect SIDE FRAMES (1,2) at the top with CROSSBAR (7) using M6x45 SCREWS (D).
Page 4
STEP 3. Attach LEFT and RIGHT SUPPORTS (3, 4) to the CROSSBAR (3) and SIDE FRAMES (1,2) with M6x15 SCREWS (F). STEP 4. Attach DESK TOP (10) to SIDE FRAMES (1, 3) with M6x40 SCREWS (E).
Page 5
STEP 5. Attach WIRE TRAY BOTTOM (5) to WIRE TRAY BACK (6) with M4x8 SCREWS (H). STEP 6. Attach WIRE TRAY (5, 6) to the rear of DESK TOP (10) with M6x12 SCREWS (G).
Page 6
STEP 7. Install HANGER HOOKS (8) to front of desk, and CUP HOLDER (12) to left or right side of desk with M6x15 SCREWS (F). STEP 8. Turn the desk onto is feet. Install LEFT and RIGHT SHLEVES (9, 11) with M6x15 SCREWS (F).
STEP 9. Turn RISER TOP (14) upside down. Install RISER BRACKETS (13) with flat sides toward rear of riser top using M6x15 SCREWS (F). Screw CLAMP KNOB (B) through the hook on the RISER BRACKETS (13) into CLAMP PAD (C). Fit the clamps over the rear of the desk, at your desired position.