Download Print this page

Evolveo Xany 5 LTE Manual

Xany 5 LTE

Feature

Receive full HD, local VHF/ UHF digital signals

TV/ wall/ table mountable

Stylish slim profile

Low noise amplifier

Detachable amplifier is included to suit different reception needs

Built-in 4G filter to avoid interference from mobile signals

Newest EU RED (Radio Equipment Directive) 2014/53/EU compliant.

Frequency: VHF 174~230MHz, UHF 470~790MHz

Impedance (Ω): 75

Connector: IEC type (male)

Voltage: AC 100-240V DC 5V/ 550mA

Cable Length: 1.5m + 0.86m

Suggest reception range: 0-50 KM from TV transmitters

antenna

bracket

Wall mounting screws

USB adapter

Table of Contents

Do you have a question about the Xany 5 LTE and is the answer not in the manual?

Page 1 Xany 5 LTE Feature Receive full HD, local VHF/ UHF digital signals TV/ wall/ table mountable Stylish slim profile Low noise amplifier Detachable amplifier is included to suit different reception needs Built-in 4G filter to avoid interference from mobile signals Newest EU RED (Radio Equipment Directive) 2014/53/EU compliant.
Page 2 external amplifier Installation Positioning Stand on table...
Page 3 TV mount Wall mount Notification 1. You can use the antenna with or without its amplifier, depending on which connection gives you the best signal. Using the amplifier provides the best performance in most situations, so try using it first. If you notice that you have lost channels that you normally receive, try connecting without amplifier.
Page 4 DECLARATION OF CONFORMITY Hereby, the company Abacus Electric, s.r.o. declares that the EVOLVEO Xany 5 is in compliance with the requirements of the standards and regulations, relevant for the given type of device. Find the complete text of Declaration of Conformity at ftp://ftp.evolveo.com/ce Copyright ©...