Advertisement
Quick Links
SIX PACK Sync MK2 • MAXX D Sync MK2
DIABLO Sync MK2
1. INTRODUCTION
Video instructions are available on our
Ensure you are familiar with your light's standard operation as detailed in the User Guide supplied.
The Diablo Sync and the handle bar Sync lights, MaXx-D and Six Pack (Bar Lights) have Bluetooth
capability to connect to both a Remote Switch and the Sync App or either one individually. In the
Sync App it is possible to customise the function of button(s) to light(s).
Out of the box the Light and its Remote are paired, but they will be in a sleep mode to save
batteries. They will need to be woken up and connected.
2. CONNECTING ONE LIGHT TO A REMOTE SWITCH OR RECONNECTING AFTER SLEEP MODE
Diablo – Press the Function button once (one green flash to confirm). It will now be ready to
reconnect.
Bar Lights - Press the Function button once. The screen will end up showing SYNC, it is now ready
to reconnect, limited to 15 seconds.
Remote - Press the striped button
striped button
broadcasting).
Diablo's rear LED will flash Amber/Red to show it is trying to connect to the Remote. When
connected it will flash Green once to confirm successful connection.
Bar Lights' rear LED will flash Amber/Red to show it is trying to connect to the Remote. When
connected it will flash Green once to confirm successful connection.
Light should now operate from the remote. The default mode on the Remote is that both buttons
scroll the mode and default program is User program 1. This can be changed within the Sync App
NOTE: If the light and switch are unable to pair see Section 8 then perform the above steps again.
3. CONNECTING TWO LIGHTS TO A SINGLE REMOTE - PREPERATION
(1st time set up. Subsequent pairings will not require the light to be reset.)
Ensure the first light is working correctly with its remote.
On the second light – put its remote to sleep by pressing the circle button
(flashes red to confirm).
Reset both lights program 12, see Section 8.
EXPUG13.2_Sync.indd 1
EXPUG13.2_Sync.indd 1
once to wake it up (one green flash to confirm). Press the
A
once more to activate Bluetooth (striped button
A
channel.
flashes red to indicate it is
A
S Y N C B
GUIDE
B
rapidly 4 times
12/11/2020 09:24
12/11/2020 09:24
Advertisement
Related Manuals for Exposure Lights SIX PACK Sync MK2
Summary of Contents for Exposure Lights SIX PACK Sync MK2
- Page 1 S Y N C B GUIDE SIX PACK Sync MK2 • MAXX D Sync MK2 DIABLO Sync MK2 1. INTRODUCTION Video instructions are available on our channel. Ensure you are familiar with your light’s standard operation as detailed in the User Guide supplied.
- Page 2 4. CONNECTING TWO LIGHTS TO A SINGLE REMOTE - OPERATION First Light: Diablo – Press the Function button once (one green flash to confirm). It will now be ready to reconnect. Bar Lights – Press the Function button once. The screen will end up showing SYNC, it is now ready to reconnect.
-
Page 3: Troubleshooting
5. POWER SAVING - SLEEP To minimise any battery wastage, the Lights and Remote will automatically go to sleep after four hours of inactivity. This can be actioned manually by pressing the button 4 times rapidly on the remote (the button flashes red once to confirm). - Page 4 8. FACTORY RESET - LIGHT Diablo - Press and hold the function button for approximately 12 seconds, in that time it will multi flash and then count through 12 flashes, (the rear LED will also flash red/green), release. The rear LED will flash once, green to confirm.
- Page 5 10. SYNC REMOTE ATTACHMENT Ensure the Remote is fitted securely and check the attachment regularly. For more information please visit: For more information please visit: exposurelights.com exposurelights.com EXPUG13.2 EXPUG13.2 EXPUG13.2_Sync.indd 5 EXPUG13.2_Sync.indd 5 12/11/2020 09:24 12/11/2020 09:24...