Advertisement
Update content on a USB flash drive
Note: You need a computer to create text files or file folders to format memory cards and prepare
a USB stick.
1. The file system format of memory card and USB flash drive must be FAT32.
Is it not that, please format memory card and USB flash drive with selection of the attribute
"FAT32".
2. Prepare the USB stick.
2.1 If retain existing content on the memory card and new content to add.
2.1.1 Create a file folder named "Upgrade1" in the root directory of the USB stick.
Copy 2.1.2 New content in this folder "Upgrade1"; there should be no subfolders.
2.2 If all the existing content deleted from the memory card and then new content to add.
2.2.1 Create a file folder named "upgrade" in the root directory of the USB stick.
Copy 2.2.2 New content in this folder "upgrade"; there should be no subfolders.
Note: The two folders "Upgrade1" and "upgrade" can not coexist on a USB flash drive for the
purpose of the upload.
3. Insert the USB flash drive while the player is running. The screen displays the progress bar for
upload is displayed. Disconnect the USB flash drive when it displays "Completed". The player now
returns to the automatic loop mode with the latest content.
Function: infrared motion
The player will automatically start playing video / pictures as soon as an approaching
viewer is detected, and so does long for a preset period of time (end time) until the
viewer is gone. After that, the player enters the idle or silent mode.
1. In the "MOTION SENSOR" of players in the mode OFF / MUTE PLAYING / SLEEP
can be switched.
OFF: Turn motion function.
MUTE PLAYING: Player playing after the viewer is gone, but in silent mode.
SLEEP: Player turns off after the viewer is gone.
Advertisement
