Related Manuals for Redgum TARANTO
Summary of Contents for Redgum TARANTO
- Page 1 TARANTO FABRIC 4 MOTOR LIFT CHAIR LC0401-2 USER MANUAL EDITION 1 Please read and keep these instructions redgumbrand.com.au...
- Page 2 TARANTO LIFT CHAIR user manual. Any information contained in this user manual shall not be photocopied, reproduced or translated into any other languages without the prior written consent of REDGUM Brand. REDGUM Brand strives to provide the highest quality products possible.
-
Page 3: Table Of Contents
ASSEMBLY - CABLE CONNECTION ASSEMBLY - BATTERY BACKUP ASSEMBLY - TRANSFORMER CONNECTION USAGE GUIDELINES - CHAIR POSITIONING USAGE GUIDELINES - HANDSET CONTROLS USAGE GUIDELINES - DO’s + DON’Ts PRODUCT CARE - INSPECTIONS / CLEANING WARRANTY REDGUM BRAND PRODUCT RANGE redgumbrand.com.au... - Page 4 The user should consult their appropriate healthcare professional if unsure of the correct product usage for their unique circumstances. Only use your Taranto Lift Chair for the purpose for which it is intended, which is as a single seating armchair that can lift, rest and recline.
- Page 5 Headrest: 580mm (W) - 260mm (H) - 0 - 45° (Angle range) Required distance from wall: 650mm Maximum User Weight: 160kg Product Weight: Base - 50kg / Backrest - 15kg / Combined - 65kg Please contact REDGUM Brand if you would like any further information. redgumbrand.com.au...
- Page 6 ASSEMBLY - UNPACK and INSPECT SUPPLIED PARTS Ensure you have been supplied with the following parts: 1 x BACKREST PARTS: 1 x LEFT WING 1 x CHAIR BASE 1 x RIGHT WING 1 x TRANSFORMER 1 x HANDSET 4 x CASTORS - 2 x Braked - 2 x Swivel) 1 x POWER CORD...
- Page 7 ASSEMBLY - ATTACH BACKREST TO CHAIR BASE Please follow these steps to attach the backrest to the chair base: 1. Position the chair base as shown 2. Align the backrest over the chair base with the padded front facing toward front of chair base. 3.
-
Page 8: Assembly - Attach Wings To Backrest
ASSEMBLY - ATTACH WINGS TO BACKREST Please follow these steps to attach the wings to the backrest: 1. Align the bracket on the wing with the bracket on the side of the backrest. 2. Slide the wing down onto the bracket. 3. -
Page 9: Assembly - Attach Castors
ASSEMBLY - ATTACH CASTORS The Taranto Lift Chair comes with castors that can be fitted to the chair base if required. The lift chair needs to be flipped onto its front as shown to gain access to the underside of base frame. -
Page 10: Assembly - Handset Connection
ASSEMBLY - HANDSET CONNECTION The Taranto lift chair comes with a handset that needs to be connected to the lift chair PRIOR to being plugged into mains power. Flip the lift chair back onto the castors. Reach into the pocket located on the side of the chair and pull out the cable. -
Page 11: Assembly - Cable Connection
ASSEMBLY - CABLE CONNECTION The Taranto lift chair has two cables located at the rear of the chair behind the cover that require connection prior to the chair being plugged into mains power. 1. Locate the two cables as shown. -
Page 12: Assembly - Battery Backup
ASSEMBLY - BATTERY BACKUP The Taranto Lift Chair is fitted with battery backup as standard. This allows for the lift / rest / recline / headrest / lumbar functions to still operate if the mains power is disrupted. It is recommended that main power is always used to operate the lift chair and the battery backup is only used to return the chair to a sitting position so the occupant can remove themselves from the lift chair. -
Page 13: Assembly - Transformer Connection
ASSEMBLY - TRANSFORMER CONNECTION The Taranto Lift Chair comes with a transformer that needs to be connected to the lift chair. 1. Locate the cable found at the rear of the lift chair on the underside. 2. Align the pins on the plug from the chair with the corresponding holes in the cable end (Flat surfaces on plugs to be inline). -
Page 14: Usage Guidelines - Do's + Don'ts
USAGE GUIDELINES - CHAIR POSITIONING Prior to using the Taranto Lift Chair please follow these steps to set up the chair in a safe manner: - Position the chair on a flat and level floor. - The lift chair should be placed near a power point. - Page 15 USAGE GUIDELINES - HANDSET CONTROLS The Taranto Lift Chair comes with a backlit handset that controls the movement of the backrest, legrest, headrest, lumbar and overall chair position. Depress the relevant button to achieve the required movement: LOWER RAISE Legrest...
- Page 16 USAGE GUIDELINES - DO’S + DON’TS Please follow these guidelines to get the optimal benefit from your Taranto Lift Chair. Failure to follow these guidelines may result in damage to the lift chair and put the user at risk: Maximum User Weight is 160kg.
- Page 17 PRODUCT CARE - INSPECTIONS / CLEANING INSPECTIONS We suggest that you visually check your Taranto Lift Chair periodically for signs of damage or wear prior to use. Pay particular attention to the following areas: - Cabling - Handsets - Transformer and battery backup...
-
Page 18: Warranty
If you have any issues or questions about your lift chair please contact your local distributor or REDGUM Brand direct on: T: +61 8 9248 4180 E: sales@for-de.com.au... -
Page 19: Redgum Brand Product Range
REDGUM BRAND PRODUCT RANGE REDGUM Brand offer a comprehensive range of products including: LOUNGE CHAIR PROTECTIVE COVER (LCCOVER) Ideal way to protect your lift chair from accidental stains Other relevant products include: Over bed chair tables Cushions: Air / Foam... - Page 20 DISTRIBUTOR: Proudly Australian Owned and Operated redgumbrand.com.au...