Basic Operation - NEFF B57VS24.0B User Manual And Installation Instructions

en Basic operation
Setting
1
0 (softened)
1 (soft)
2 (moderately hard)
3 (hard)
2
4 (very hard)
Only set this if you will be using solely softened water.
1
Also set for mineral water. Only use non-carbonated mineral water.
2
6.2 Initial use
When the appliance is connected to the power supply
for the first time or following a lengthy power failure, the
settings that you will need to configure before you can
use it will appear.
Notes
¡ You can change these settings at any time by going
to the basic settings.
→ "Basic settings", Page 20
¡ You can also use Home Connect to configure the
settings. If your appliance is connected, follow the
instructions in the app.
Setting the language
Connect the appliance to the power supply.
1.
a The first setting will appear after a few seconds.
Use the button to navigate to the bottom row.
2.
3. Use the or button to select the language.
Use the button to navigate back to the top row.
4.
Use the button to select the next setting.
5.
Setting the time
Use the button to navigate to the bottom row.
1.
Use the or button to select the correct hour.
2.
Use the button to navigate to the next row.
3.
Use the or button to select the correct number of
4.
minutes.
Use the button to navigate back to the top row.
5.
Use the button to select the next setting.
6.
Setting the date
Use the button to navigate to the next row.
1.
Use the or button to select the correct day.
2.
Use the button to navigate to the next row.
3.
4. Use the or button to select the correct month.
Use the button to navigate to the next row.
5.
Use the or button to select the correct year.
6.
7. Press the button repeatedly until "Date" appears.
Use the button to apply the settings.
8.
Setting the water hardness
Use the button to navigate to the bottom row.
1.
Use the or button to select the water hardness
2.
range.
→ "Before using for the first time", Page 11
Use the button to navigate back to the top row.
3.
7 Basic operation
7.1 Switching on the appliance
Press to switch the appliance on.
▶
12
Water hardness in
mmol/l
-
Up to 1.5
1.5-2.5
2.5-3.8
Above 3.8
4.
5.
a The appliance will perform a self-test, after which it
a Initial configuration is now complete.
6.3 Cleaning the appliance
Before using the appliance to cook food for the first
time, you must clean the cooking compartment and ac-
cessories.
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
German hardness in
°dH
-
Up to 8.4
8.4-14
14-21.3
Above 21.3
Use the button to save your settings.
Open and close the appliance door once.
will be ready to use.
Remove the product information, accessories and
any leftover packaging (e.g. polystyrene pellets)
from the cooking compartment.
Wipe the smooth surfaces in the cooking compart-
ment with a soft, damp cloth.
Press to switch the appliance on.
→ "Switching on the appliance", Page 12
Fill the water tank.
→ "Filling the water tank", Page 13
Set the required heating function, temperature and
steam assistance for the heat-up process and press
to start.
→ "Setting the type of heating and temperature",
Page 13
→ "Steam-assisted cooking", Page 15
Heating up
Heating function
Temperature
Cooking time
Keep the kitchen ventilated while the appliance is
heating.
Press to switch off the appliance after 1 hour.
→ "Switching off the appliance", Page 13
Allow the appliance to cool down.
Clean the smooth surfaces with soapy water and a
dish cloth.
Empty the water tank and dry the cooking compart-
ment.
→ "After every steam operation", Page 15
Thoroughly clean any accessories you used with
soapy water and a dish cloth.
French hardness °fH
-
Up to 15
15-25
25-38
Above 38
CircoTherm hot air
with steam assistance
, steam intensity "High"
Maximum
1 hour