Advertisement
Quick Links
Cubby Swing
PRE-INSTALLATION
WARNING!
You must attach your Cubby Swing only in the configurations shown below – to a Medium or Large swing set or play set
configuration with capacity for two or three standard swings side by side.
You must not attach onto a Small swing set or play set (with capacity for only one standard swing).
INSTALLATION
1
STEP
Connect each
Tube until you have
created the full ring
base.
ASSEMBLY MANUAL
2
STEP
Remove a Locking Bolt from
the Rail Bracket and slip it
over a Joiner on the Swing
Rail.
Reinsert the Locking Bolt
and tighten the bolts firmly
– until you notice the rubber
beginning to squeeze – to
secure the Rail Bracket.
1
Advertisement
Related Manuals for Vuly Cubby Swing
Summary of Contents for Vuly Cubby Swing
- Page 1 PRE-INSTALLATION WARNING! You must attach your Cubby Swing only in the configurations shown below – to a Medium or Large swing set or play set configuration with capacity for two or three standard swings side by side. You must not attach onto a Small swing set or play set (with capacity for only one standard swing).
- Page 2 ASSEMBLY MANUAL STEP STEP Unlock the carabiner on your Cubby Swing, and hook it into the Rail Bracket. Insert the completed ring into the base of your hanging Cubby Swing material. Go around the ring and secure it to the material STEP inside with the attached Velcro straps.