Vuly Yoga Manual

MANUAL

PRE-INSTALLATION

Open your Yoga Swing box and ensure that you have; 1 x Yoga Swing (with carabiners attached) and 2 x Adjustment Straps (with
carabiners attached).

INSTALLATION:

SWING SETS:

1. Remove the Yoga Swing and Adjustment Straps from
the box.
2. Unlock the upper carabiners on your Swing and
hook them into the lugs on the Swing Rail or . Ensure
that both carabiners are facing the same direction
and have been firmly tightened.
3. Unlock the carabiners on your Adjustment Straps and
hook them into the lugs on the Swing Rail. Ensure
that both carabiners are facing the same direction
and have been firmly tightened.
4. Unlock the carabiners on your Yoga Swing and
attach them to the appropriate loops on the
Adjustment Straps according to user height – see
diagram below.
REMEMBER: The Adjustment Straps must be installed on the appropriate setting according to user height. Ensure that
the user's feet can touch the ground.
CONGRATULATIONS!
Yoga Swing
You have attached your Yoga Swing onto your Vuly
QUEST:
1. Remove the Yoga Swing and Adjustment Straps from
the box.
2. Ensure that the Accessory Joiners on your Quest rail
are positioned at minimum of 51cm apart.
3. Unlock the carabiners on your Adjustment Straps and
hook them into the lugs on the Accessory Joiners.
Ensure that both carabiners are facing the same
direction and have been firmly tightened.
4. Unlock the carabiners on your Yoga Swing and
attach them to the appropriate loops on the
Adjustment Straps according to user height – see
diagram below.