Table of Contents
Advertisement
Quick Links
Gobius Pro, Instructions on paper, August 2019-1
Hi.
This information is for you who likes to have them written on paper.
You will get the same and more updated info when downloading the App,
Gobius, from Internet, Google play and App Store.
Please note that you have to get the App before installing the sensor.
You do all settings from the App.
After installation you don't need the App for using the Gobius Pro.
If you connect a panel like our Gobius fish with 2 LEDs in red and green,
you don't need your phone to use the sensor.
1
Download the Gobius App from Google Play or App Store.
2
In the Gobius Pro box you get:
-
1 sensor with 2 m cable
-
1 tank surface 3M Cleaner
-
1 extra 3M sensor tape
-
1 panel (the Gobius fish) with
1 red and 1 green LED light
3
Check the tank wall thickness. If it's thicker than the specification,
Gobius Pro will not work.
-
Stainless Steel & Steel 3 mm
-
Polyethene, 12 mm
-
Aluminium, 5 mm
-
Fibre Glass, 8 mm
4
There are some more important things you have to consider
before mounting the sensor on the tank wall.
-
Don't put the sensor closer than 35 mm from an edge,
or another sensor and always on a vertical side of the
tank.
-
The tank wall temperature has to be above + 20 C (+ 68 F).
If it's below the tape will not work satisfying. A heat gun
or a hair dryer can be useful when you need to heat up
the tank wall. After the installation the sensor will work
between -10 C and + 60 C.
Gobius Sensor Technology AB
Ljungåsvägen 2
302 91 Halmstad
Sweden
Phone +46 (0)31 650170
www.gobius.se
info@gobius.se
Advertisement
Table of Contents
Related Manuals for Gobius Pro
Summary of Contents for Gobius Pro
- Page 1 You do all settings from the App. After installation you don’t need the App for using the Gobius Pro. If you connect a panel like our Gobius fish with 2 LEDs in red and green, you don’t need your phone to use the sensor.
- Page 2 Your smart phone has to have Bluetooth activated to get in contact with the sensor. Please have a look in your phones Configuration. The Gobius App will automatically connect to the sensor. You DON’T have to pair the sensor in your phones configuration.
- Page 3 Now it’s time for configuration. Give your tank a name Alarm, select o When the level is above the sensor o When the level is below the sensor o Always off Fluid, select o Water tank o Gasoline tank o Diesel tank o Grey water tank o Waste/black water tank o Oil tank...
- Page 4 o On when the level is above the sensor o On when the level is below the sensor Calibration, select (The fluid level has to be above or below the sensor when performing the calibration) o Full tank o Empty tank After performing this configuration you can start the Calibration.
- Page 5 If a title on your phone is in grey, it means that you are not Bluetooth connected to your sensors. Sample with the Gobius fish panel Digital output 1: Select, “On when the level is above the sensor”, please connect the green cable + the red cable to the fish cables.
- Page 6 The products are easy to install, easy to use, reliable and are environmental friendly. Gobius is marketed by distributors and dealers in 22 countries. The company started in 2008 as FM Marin AB and has launched products, which in an easy and effective way, from the outside of the tank, measure the level of waste, water, fuel and fluid tanks.
Need help?
Do you have a question about the Pro and is the answer not in the manual?
Questions and answers