Apex Digital DRX-9200 Connection Manual

Connecting Your DRX-9200
The following diagrams will show you how to connect your DVD Recorder to your stereo TV using
Composite or S-Video connections. For more detailed instructions, refer to the Quick Connection Guide
Before operating, you must set the clock and television tuner on the DRX-9200.
Do not connect the DVD player to a VCR or TV/VCR combination unit. Playback through these units
may be distorted due to the Macrovision copyright protection circuitry in all DVD devices.
If your TV has an RF input only, you'll need to purchase an optional RF Modulator. See your local con-
sumer electronics retailer or shop online at www.apexdigitalinc.com under Accessory Store.
IMPORTANT NOTICE
1. Turn off power and unplug all units before connecting.
2. Use this guide for reference only. This is a sampling of the cables you can use to
connect your DVD recorder.
Cables
Composite cables
(included)
RF Coaxial cable
(not included)
S-Video cable
(not included)
Connecting to a TV using Audio / Video Input
Note: The audio / video cables shown below are only examples. For best results, we recommend using the best connections available
on your equipment.
Back of DRX9200
TV ANTENNA
OUT IN
Pr r Pr Y Y Pb Pb
P-SCAN
Component cables
(not included)
Connecting your DRX-9200 DVD+RW Recorder to your TV
IEEE 1394 cable
(not included)
GOOD (shown) Composite Video, with Stereo Audio. Connect yellow to Video Out; connect red to Audio Out
"R" and white to Audio Out "L", as shown above.
S-video (optional) provides better video than composite. Check your TV for compatibility
BETTER (shown)
before proceeding. Connect S-Video cable to S-Video Out; connect red to Audio Out "R" and
white to Audio Out "L", as shown above. Note: Yellow video cable must be completely dis-
connected.
BEST(not shown) Component video cables (not included) provide the best quailty picture. Refer to the Quick
Connection Guide.
COAXIAL
L
OUTPUT
R
S-VIDEO VIDEO-OUT AUDIO
Verify you have selected the same input
source (Video 1, etc) on your TV that corre-
sponds to your DVD Recorder connection.
come play with us
Setting the Clock
1 Press SETUP to access the SETUP Menu.
2 Using the UP/DOWN keys, highlight SCHEDULE and press / to enter the SCHEDULE sub-
menu.
3 Using the UP/DOWN keys, highlight DATE TIME and press .
/
4 Using LEFT/RIGHT to move between fields, and UP/DOWN to change the numbers, set the hours
and minutes. After selecting minutes, press RIGHT twice to get to the DATE field.
5 Using LEFT/RIGHT to move between fields, and UP/DOWN to change the numbers, set the month,
day, and year. Press / when finished.
6
Press SETUP to exit the SETUP menu.
Setting the Tuner
1 Press SETUP to access the SETUP Menu.
2 Using the UP/DOWN keys, highlight CHANNEL and press / to enter the CHANNEL sub-
menu.
3
Using the UP/DOWN keys, highlight CABLE/ANTENNA and press /
4 Choose your signal source - either cable or over-the-air antenna. When finished, press LEFT ARROW
to return to the CHANNEL sub-menu.
5 Using the UP/DOWN keys, highlight CHANNEL SEARCH and press
CONFIRM and press / .
When the CHANNEL SEARCH is finished, press the
6
SETUP key to save your settings and exit SETUP.
.
/ Then, highlight