Apex Digital AD-703A User Manual page 24

Apex ad-703a: user guide
Table of Contents

Advertisement

Connecting to Optional Equipment
Enjoy Dolby Digital or DTS (BEST)
Dolby Digital/DTS
Dolby Digital and DTS surround sound are currently what you hear
when you go to movies. Now you can enjoy home theater, or concert
like audio with the most amazing sound quality, in the comforts of
your own home.
Dolby Digital and DTS programming can deliver surround with five
discrete full range channels plus a sixth channel for subwoofers. You
can enjoy your APEX DVD with your Dolby Digital or DTS Digital
Surround Sound System. All you need is to connect your DVD player
to a Dolby Digital/DTS receiver, or a Dolby Digital Ready receiver with
an external (AC-3) decoder.
How to setup the sound output
• From the SETUP MENU displays, set the "AUDIO OUT PUT" to "SPDIF/RAW".
This product incorporates copyright protection
technology that is protected by method claims of
certain U.S. patents and other intellectual property
rights owned by Macrovision Corporation and other
rights owners. Use of this copyright protection
technology must be authorized by Macrovision
Corporation, and is intended for home and other
limited viewing uses only unless otherwise
authorized by Macrovision Corporation. Reverse
engineering or disassembly is prohibited.
NOTICE
• Do not connect the PCM/DOLBY DIGITAL AUDIO OUT jack of the DVD video player to the AC-3 RF input of a Dolby Digital receiver.
Instead, connect to the "DIGITAL" or "COAXIAL" input of a Dolby Digital/DTS receiver or Processor. The input of the A/V receiver is
not compatible with the PCM/DOLBY DIGITAL AUDIO OUT jack and is primarily for Laserdiscs only.
• Connect the PCM/DOLBY DIGITAL AUDIO OUT jack of the DVD video player to the "DIGITAL" or "COAXIAL" input of a Dolby
Digital/DTS receiver or Processor.
• It will be helpful to also refer to the manual of the connected TV.
• Turn off the power and unplug both units before setting up any connections.
• Due to the wide dynamic range of sound output of the DVD video player, adjust the volume of your receiver to a comfortably modist
listening level to avoid any speaker damage.
• When connecting or disconnecting the DVD video player, be sure to turn off the amplifier to avoid any speaker damage.
17
A
P
E
X
D
I
G
I
T A
L
To VIDEO OUT
It is forbidden by law to copy, broadcast, show, broadcast on
cable, play in public, and rent copyrighted material
without permission.
DVD video discs are copy protected, and any recordings
made from these discs will be distorted.
Manufactured under license from Dolby Digital
"
Laboratories. Dolby and the Double-D symbol are
"
trademarks of Dolby Laboratories. Confidential
unpublished works.
1992-1997 Dolby Laboratories,
c
Inc. All rights reserved.
"
"
DTS and DTS Digital Out are trademarks of Digital
"
Theater System, Inc.
dts
To PCM/DOLBY DIGITAL AUDIO OUT
"
AD-703A

Advertisement

Table of Contents
loading

Table of Contents