Apex Digital AD-700 User Manual page 17

Playing Back a Disc
FOR A HIGHER QUALITY PICTURE
The DVD video discs produces a high resolution picture as well as contains
a lot of information. This causes periodical picture noise on the TV during
playback. The noise will vary depending on the selected TV used with this
DVD video player.
adjustment on your TV when viewing DVD video discs.
ABOUT DVD VCD CD
On the heading bar the DVD VCD CD icons will appear depending on the
disc being playbacked.
DVD: DVD video discs
VCD: Video CDs
CD: Audio CDs
HOW TO START PLAYBACK FROM THE MENU SCREEN
1. Press
2. Press the ENTER/PLAY button
The DVD video player will start playback
from the title selected.
HOW TO PAUSE PLAYBACK (STILL PLAYBACK)
Press the PLAY/PAUSE
during playback
Press the PLAY/PAUSE or
ENTER/PLAY button to resume normal
playback.
During the still playback the sound is muted.
HOW TO STOP PLAYBACK
Press the STOP button
The DVD video player is stopped.
Press the ENTER/PLAY button
to replay.
Press the STOP button twice.
Press the ENTER/PLAY button.
The DVD video player returns to chapter 1 or track 1.
Continued
To control the picture noise reduce the sharpness
or the number buttons to select the title.
PLAY
ENTER
HOW TO REMOVE THE DISC
Press the OPEN/CLOSE button
Wait until the disc tray is completely open
before removing any discs.
After removing the discs, press the
OPEN/CLOSE button to close the disc tray.
NOTICE
At the completion of each movie a menu screen will appear.
Be aware that the on-screen setup menu may damage your
TV by permanently burning that image onto the screen. To
avoid this, press the STOP button at the completion of each
movie. You may also decide to setup the SCREEN SAVER.
STOP
Title 2
Title 1
Title 4
Title 3
A P E X D I G I T A
TITLE
PLAY/PAUSE
ENTER/PLAY
17
L