Table of Contents
Advertisement
Quick Links
1
PLACE THE REMOTE CONTROL TO BE CLONED PERPENDICULARLY, IN THE LOWER LEFT SIDE OF THE AIR4
2
PRESS BUTTON 1 ON THE AIR4
REMOTE CONTROL
4
RELEASE BOTH BUTTONS
6
PRESS AND HOLD DOWN THE BUTTON TO BE COPIED
FROM THE ORIGINAL REMOTE CONTROL AND WAIT
FOR THE AIR4 LED TO START FLASHING RAPIDLY,
WHICH CONFIRMS ACQUISITION OF THE CODE.
RELEASE THE BUTTON
COPY FIXED CODE REMOTES
with AIR4 Q
7
PRESS THE AIR4 REMOTE CONTROL BUTTON TO BE
MEMORIZED. WAIT FOR THE LED TO GO OUT
Copyright by Silca S.p.A. - All Rights Reserved
3
AT THE SAME TIME PRESS BUTTON 4
FOUR TIMES
5
AIR4 REMOTE CONTROL LED WILL
START FLASHING BRIEFLY ABOUT
EVERY 2 SEC.
Advertisement
Table of Contents
Related Manuals for Silca AIR4Q
Summary of Contents for Silca AIR4Q
- Page 1 FOR THE AIR4 LED TO START FLASHING RAPIDLY, WHICH CONFIRMS ACQUISITION OF THE CODE. RELEASE THE BUTTON PRESS THE AIR4 REMOTE CONTROL BUTTON TO BE MEMORIZED. WAIT FOR THE LED TO GO OUT Copyright by Silca S.p.A. - All Rights Reserved...
- Page 2 THE REMOTE CONTROL SLIGHTLY AWAY FROM THE EASY SCAN DEVICE AND REPEAT THE PROCESS UNTIL YOU REACH THE MAXIMUM AMPLITUDE OF INTENSITY INDICATED ON THE EASY SCAN DISPLAY CLOSE THE REMOTE CONTROLS SHELLS. Copyright by Silca S.p.A. - All Rights Reserved...
Need help?
Do you have a question about the AIR4Q and is the answer not in the manual?
Questions and answers