Page 1
TURNTABLE SYSTEM TT- 1852E INSTRUCTION MANUAL PLEASE READ THIS USER MANUAL COMPLETELY BEFORE OPERATING THIS UNIT AND RETAIN THIS BOOKLET FOR FUTURE REFERENCE.
WARNING PREVENT FIRE SHOCK HAZARD, THIS PLUG WITH EXTENSION CORD, RECEPTACLE OR OTHER OUTLET UNLESS THE BLADES CAN BE FULLY INSERTED TO PREVENT BLADE EXPOSURE. TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. The Caution Marking is located at the back enclosure of the apparatus.
Page 4
Power Sources - This product should be operated only from the type of power source indicated on the marking label. If you are not sure of the type of power supply to your home, consult your product dealer or local power company. For products intended to operate from battery power, or other sources, refer to the operating instruction.
Page 5
Location of controls 1) Dust cover 2) LED display 3) Speakers 4) Skip down / Skip up button 5) Play mode 6) On-Off / Function button 7) Memory button 8) TS (Track Separation) button 9) Record button 10) 3.5 mm headphone jack 11) 3.5mm aux-in jack 12) USB socket 13) Volume knob...
Page 6
Bluetooth connecting and playback 1. Press the On-Off/Function button (6.) to turn on the unit and the LED display (2.) will show “ Lod ”, then change to “ bLUE”. 2. You may need to press the “ bLUE ”. On-Off/Function button (6.) until the LED display (2.) shows 3.
Page 7
Listen to the phono Noted: Remove the stylus protector. Be sure that the tone arm is being detached from the tone arm rest before operating and re-secured again afterwards. Be sure that the Aux-in jack (11.) is not being connected during the phono operation (see below point 2 of the remark).
Page 8
Pause / Play mode (no Stop mode for USB playback) 1. To interrupt, press the Play/Pause/Stop button (15.) once, the playing time will be freeze & flashing on the LED display (2.). Press again to resume normal playback. Skip/search mode (skip/search up /skip/search down 1.
Page 9
Encoding from Phono or Aux in into mp3 file The system is able to encode the Phono or Aux in or FM tuner to MP3 format and recording at memory media with USB connecting port. A) Phono encoding Plug in the USB flash drive you wish to record onto (make sure it has enough free space). Press the On-Off/Function button (6.) to turn on the unit and press it again until the LED display (2.) shows “...
Remote control transmitter Button description On/Off Press to switch on/off the system. Mute Press to suspend the sound output temporally. Press again to resume the sound output. Memory In FM mode, press and hold to preset the radio station. Or press to recall the preset station. Skip down In USB mode : to select previous track In FM mode: tuning the radio station...
Need help?
Do you have a question about the TT- 1852E and is the answer not in the manual?
Questions and answers