Apex Digital AD-1165 User Manual page 12

How to Connect your Player - continued
Best
Dolby Digital and DTS programming can deliver sur-
round sound with five discrete full range channels plus
a sixth channel for a subwoofer.
You can enjoy your APEX DVD with a Dolby Digital or
DTS Digital equipped home theater system. All you
need is to connect your DVD player to a Dolby
Digital/DTS receiver or a Dolby Digital Ready receiver
with an external decoder. Connect the Digital (RCA)
Coaxial output of your player to Digital (RCA) Coaxial
input of the amplifier.
How to setup the digital output:
From the "Audio setup page", set "Digital Out" to "RAW"
with DIRECTION buttons and then press ENTER/PLAY.
IMPORTANT:
This product incorporates copyright protection technolo-
gy that is protected by method claims of certain U.S.
patents and other intellectual property rights owned by
Macrovision Corporation and other rights owners. Use
of this copyright protection technology must be author-
ized by Macrovision Corporation, and is intended for
home and other limited viewing uses only unless other-
wise authorized by Macrovision Corporation. Reverse
engineering or disassembly is prohibited.
It is forbidden by law to copy, broadcast, show, play in
public, and rent copyrighted material without permis-
sion.
DVD video discs are copy protected, and any record-
ings made from these discs will be distorted.
DTS and DTS Digital Out are trademarks of Digital
Theater Systems, Inc. Manufactured under license from
Dolby Labs.
Dolby and the double-D symbol are trademarks of
Dolby Laboratories. Confidential unpublished works.
1992-1997 Dolby Laboratories, Inc. All rights reserved.
Yellow
To TV Video Input
Front Left
Speaker
Dolby Digital (5.1) Surround
Connection Example
Surround Left
Speaker
11
To Dolby Digital Equipped
Receiver/Processor
Front Right
Speaker
Center Channel
Surround Right
Speaker
SUBWOOFER