Download Print this page

Curtis 47587420002 Installation & Owner's Manual

Club car carryall rops cab overhead console, w/o fans

Advertisement

Quick Links

CLUB CAR CARRYALL
OVERHEAD CONSOLE
Approximate Installation Time *
Experienced Dealer Technician – 30 Minutes
Average Dealer Technician – 45 Minutes
Do-It-Yourself – 1 Hour
(*=Not including other accessories)
The contents of this envelope are the property of the owner. Leave with the owner when installation is complete.
ROPS CAB
(w/o Fans)
p/n: 47587420002
Approximate Product Specifications
Weight: 9.17 lbs. (4.16 kg)
1 of 7
Rev. B, 11/24/2020
p/n: IM-47587420002

Advertisement

loading

Summary of Contents for Curtis 47587420002

  • Page 1 1 of 7 CLUB CAR CARRYALL ROPS CAB OVERHEAD CONSOLE (w/o Fans) p/n: 47587420002 Approximate Installation Time * Approximate Product Specifications Experienced Dealer Technician – 30 Minutes Weight: 9.17 lbs. (4.16 kg) Average Dealer Technician – 45 Minutes Do-It-Yourself – 1 Hour (*=Not including other accessories) The contents of this envelope are the property of the owner.
  • Page 2: Installation

    For accurate installation, proper operation, and years of satisfaction, please read and understand the installation and owner’s manual fully prior to installing the console. From all of us at Curtis, we thank you for choosing our product TOOLS REQUIRED: ADDED...
  • Page 3 3 of 7 INSTALLATION 3. Console Wiring: Connect to 3.1 Unplug the cab power wire from the wiper motor. wiper motor Connect the cab power wire to the short harness (without wire loom) inside console from the fuse block. See figure 3.1. Connect power Note: the wire connections from the console fuse block to console...
  • Page 4 4 of 7 INSTALLATION 5. Changing Fuse (For Gasoline Vehicles Only): Electronic component box NOTE; If you have the electric vehicle, skip this section and proceed to step 6. 5.1 Lift bed or remove seat in order to access electronic component box. 5.2 Remove the screw the secures the cover to the electronic component box in the compartment un- der the driver’s seat as shown.
  • Page 5 5 of 7 OVERHEAD CONSOLE TROUBLESHOOTING Condition Possible Solution • All console lights are off • Vehicle Ignition Key is off • Check 15 Amp fuse • One switch light is off • Check fuse for that device (see below) •...
  • Page 6: Service Parts

    6 of 7 SERVICE PARTS PART NUMBER. DESCRIPTION QTY. 8SV-FP01-B4 FUSE BLOCK, 6-POSITION WITH MOUNTING BRACKET 8SV-OHCFC-B4 FUSE COVER 9SV-OHCSCC SWITCH SET, (SET OF 3 SWITCHES WITH COVERS) 9SV-WHOHC1 WIRE HARNESS, FUSE BLOCK 9SV-WHOHC2 WIRE HARNESS, WIPER 9SV-WH-00030 WIRE HARNESS, BEACON LIGHT AND DOME LIGHT 9SV-WH-00031 WIRE HARNESS, WORK LIGHTS...
  • Page 7 Tightening of Non-Structural Bolts For light or medium duty fastening, Curtis recommends using a general industry standard of tightening until snug and then giving an additional one quarter turn of the tool as deemed reasonable for the application (i.e.: at the installer’s discretion).