URBANGLIDE MOTO CROSS 2.0 User Manual page 7

Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 1
Charging the battery
CAUTION: The battery must be fully charged before each use.
First charge required: 12 hours
Next recharge: about 12 hours, depends on the discharge rate.
If the motorcycle has been damaged, the battery may need to be recharged monthly to maximize
its performance.
Note: Make sure the unit is turned
off when not in use. If the unit is
turned on for a long time, the
battery may have run out.
Note: These devices have been tested for your safety and are designed to work with Class B digital
devices, in accordance with Part 15 of the FCC Rules. This type of equipment can generate radio frequency
energy. If the instructions are not followed correctly, these frequencies may be harmful for radio
communications. In addition, there is no guarantee that interference will not harm other equipment.
If these interferences interfere with your telephone or TV communications, you are advised to turn off
and on your equipment. If interference persists, follow these steps:
-
Shift or reorient your antenna - Move the charger away from your antenna.
-
Connect your charger to a socket that is part of another electrical circuit.
-
Contact the technical support of your TV / Phone.
Warning: Do not use the product without charging your battery for the 12 hours required, otherwise
you will damage your product and have the warranty void. Do not leave the battery in extreme
temperatures. (Above 21 ° C - below 0 ° C). The battery needs to be charged at least once a month, ev en
if the bike is not in use.
BEFORE USING
1. Insert the charger into a wall
outlet. If the charger does not
display light, check your wall outlet
or test another one.
2. Turn off the device before
charging, then insert the charger
into the charging port on the
motorcycle.
7

Advertisement

Table of Contents
loading

Related Products for URBANGLIDE MOTO CROSS 2.0

Table of Contents