Advertisement
1
Position the left-hand case side (B)
on the base (A).
Screw in the two screws (J)
avoiding overtightening them.
4
Install the glass door (E) and insert
the long screws (K) in the hinges.
NB: Proceed with caution to carry
out this operation.
Batteries required:
Movement: 1 x AA/LR06, 1.5V
Speaker: 2 x AA/LR06, 1.5V each
Pendulum: 2 x C/ LR14, 1.5V
ASSEMBLY OF THE CLOCK
Do the same for the right-hand
case side (C) (the one with the
hinges).
Delicately
position the top section (F) on
the top and screw in the
screws (J) on the left-hand and
right-hand case sides (see
illustration above).
TECHNICAL SPECIFICATIONS
2
Position the rear case (D) into the
grooves located inside the case
sides (B and C). Next, slide the
case down as far as the base.
Once you've ensured that it is
properly inserted, finish tightening
the screws (J) on the case sides (B
and C).
5
and
carefully
Insert the cover of the battery
compartment (G) on the back of
the clock and push downwards.
3
6
Advertisement
