Technical Data; Service Department - Gardeo GMTBE1506W Original Instructions Manual

Mains voltage V
Mains frequency Hz
Power input W
-1
No load speed min
Safety class
Working width mm
Diameter of the blades mm
Depth of work Max. mm
Number of Blades
Int. protection degree
Weight kg
Values of noise emissions measured by the
standard:
Acoustic pressure level L
89.1 dB(A) K = 3 dB(A)
Acoustic power level L
93 dB(A) K = 3 dB(A)
The sound power pressure
may exceed 85 dB(A), in this
case individual hearing
protection must be worn.

SERVICE DEPARTMENT

_ Damaged switches must be replaced by our
after-sales service department.
_ If replacing the power cord is necessary, it
should be done by the manufacturer or his
agent to avoid a hazard.
After-sales Service and Application Service
Our after-sales service responds to your
questions concerning maintenance and repair
of your product as well as spare parts. Exploded
views and information on spare parts can also
be found under:www.eco-repa.com
ELEM GARDEN TECHNIC application service
team will gladly answer questions concerning
our products and their accessories :
sav@eco-repa.com

TECHNICAL DATA

230-240
50
1500
200
II
400
205
220
6
IPX4
11.7
PA
WA
ATTENTION !
SERVICE DEPARTMENT
Weighted root mean square acceleration
according to relevant standard
right 1.902 m/s²
left 2.246 m/s²
The declared vibration total value
has been measured in accordance with a
standard test method and may be used for
comparing one tool with another that the
declared vibration total value may also be
used in a preliminary assessment of
exposure.
A warning that the vibration
emission during actual use of the power
tool can differ from the declared total value
depending on the ways in which the tool is
used and of the need to identify safety
measures to protect the operator that are
based on an estimation of exposure in the
actual conditions of use (taking account of
all parts of the operating cycle such as the
times when the tool is switched off and
when it is running idle in addition to the
trigger time).
STORAGE
Store your Electric Hoe
away from fuels, oils,
_ Thoroughly clean the whole machine and its
accessories.
_ Store it out of the reach of children, in a stable
and secure position, in a cool and dry place,
avoid too high and too low temperatures.
_ Protect it from exposure to direct sunlight.
Keep it in the dark, if possible.
_ Don't keep it in plastic bags to avoid humidity
build-up.
At the end of the season, perform a general
inspection of the machine and remove any
deposits
which may have accumulated. At the start of
each
K= 1.5 m/²
K= 1.5 m/²
Risk of fire !
grease and gases.