Panasonic WH-TX30B9E8 Operating Instructions Manual page 7

CARE & CLEANING CARE & CLEANING
• Switch off the power supply before cleaning.
• Cut the water supply to the water tank.
CAUTION
Tank Enclosure & Contol Panel Tank Enclosure & Contol Panel
• Do not splash water directly.
• Wipe the unit gently with a soft, dry cloth.
Filter Filter
• Clean the fi lter regularly.
• Wash/rinse the fi lter gently with water to avoid damage to the fi lter surface.
• Please consult authorized dealer to replace any damage fi lter.
Inspection Inspection
• In order to ensure optimal performance of the unit and safe use of this product, seasonal inspections at regular intervals
have to be carried out on the unit, pipes, consumable parts (pressure reducing valve, escape valve, expansion vessels,
etc) and fi eld wiring.
• Regular inspection and maintenance should be carried out by authorized dealer. Please arrange with authorized dealer.
• Please consult authorized dealer if any improper operation or water leaking is observed.
For Extended Non-Use For Extended Non-Use
• Turn off the power supply.
• Discharge the remaining water in the tank unit.
Perform the steps below to check system status Perform the steps below to check system status
STEP 1: Press
CHECK
STEP 2: Press
CANCEL
• Press to exit STATUS mode.
• Once STATUS mode is entered, "STATUS" indicator is ON.
• STATUS mode cannot be activated when the "SETTING" indicator is ON.
TANK SETTING MIX WATER
HEATER 1 SET
SELECT
HEATER 2
CANCEL
HEATING
for 5 seconds to enter STATUS mode.
or to check the Tank Sensor Temperature or Error History.
STATUS
CHECK
SEARCH
TEMP
ERROR
RESET
1
2
7