Operation Instructions - NORPOLE NPDH301 User Manual

30/70 pint dehumidifier
Table of Contents

Advertisement

Available languages

Available languages

OPERATING INSTRUCTIONS
LOCATION
Be sure to set up the dehumidifier on a level floor, with at least 8" (20 cm) of clearance on the sides and
back and 15" (40 cm) on top. The unit is designed to be used within a temperature range of 41°F (5°C) -
95°F (35°C). It should be close enough to a properly grounded 3-prong outlet for the cord to easily reach.
CONTROLS
b
c
a.
Power: Turns the dehumidifier on and off.
b.
Filter: The check filter feature is a reminder to clean the Air Filter for more efficient operation. The
Filter light will illuminate after 250 hours of operation. To reset after cleaning the filter, press the Filter
button and the light will go off.
c.
Mode: Press to select the desired operation mode from Dehumidifying, Continuous dehumidifying
and Comfort dehumidifying. At Comfort dehumidifying mode, the unit will automatically control room
humidity in a comfortable range 45%~55% according to the room temperature. The humidity setting
function will be invalid.
d.
Fan
Press the FAN button to select either HIGH or NORMAL fan speed.
Set on HIGH for maximum humidity removal. Set to NORMAL when humidity has been reduced
or when quieter operation is preferred.
e.
Timer (Timer Set Control)
If the unit is on, pressing the Timer button once will start the Auto-Off stop program, and the
Off indicator light above the timer button will be lit. Pushing the Timer button again within 5
seconds will switch to the Auto-On start function, and the On indicator will be lit.
g
h
f
e
8
Figure 3
d
a

Advertisement

Chapters

Table of Contents
loading

This manual is also suitable for:

Npdh701

Table of Contents