Numark Everwood Harrington Assembly Instructions

3 piece seating set

Table of Contents

Download this manual

Everwood Harrington 3 piece seating set

Questions, problems, missing parts with this product? Do not return to your

retailer,please call our customer service department 9:00 a.m. to 5:00 p.m.

Eastern Standard Time Monday through Friday Phone # 1-800-457-4652

or contact us at www.numarkcustomerservice.com

Care and Maintenance

Though its powder-coated finish is rust-resistant, steel is prone to rust over time with exposure to the elements. In case of rust or scratches,

lightly sand the affected area and apply touch-up paint. To maintain the finish periodically apply wax with a soft cloth.

Wash frames with a mild solution of soap and water; rinse thoroughly. Do not use bleach or solvents.

Do not store anything on tabletop. Use furniture covers or store indoors during cold or inclement weather.

ASSEMBLY INSTRUCTIONS

SR-I-139N/3

Table of Contents

Do you have a question about the Everwood Harrington and is the answer not in the manual?

Page 1 Everwood Harrington 3 piece seating set ASSEMBLY INSTRUCTIONS SR-I-139N/3 Questions, problems, missing parts with this product? Do not return to your retailer,please call our customer service department 9:00 a.m. to 5:00 p.m. Eastern Standard Time Monday through Friday Phone # 1-800-457-4652 or contact us at www.numarkcustomerservice.com...
Page 2 Parts right arm left arm seat back table top (Attached with 12 bolts and 12 washers) Hardware Ga x 12 +1 spare Gb x 4 Ge x 1 Gc x 16 Gd x 1 Short Bolt Assembly Instructions Sheet Long Bolt Metal Washer Allen Wrench Assembly instruction...
Page 3 Assembly instruction Ga x 4 Short Bolt Gc x 4 Metal Washer Do not tighten completely. Repeat procedure for the other side. Gb x 2 Long Bolt Gc x 2 Metal Washer Do not tighten completely. Repeat procedure for the other side.
Page 4 Assembly instruction Once all bolts are in place, go back and tighten all bolts by using Allen wrench (Gd). Repeat procedure for the other chair. Ga x 12 Short Bolt (Remove from table top) Gc x 12 Metal Washer (Remove from table top) Do not tighten completely.

Sr-i-139n/3